I saw it on Ebay/Craigslist

[ILikesEmGreen]

Messaged the seller about the actual bar guage. B interesting what his reply will be.

Good looking out. Might jump if it's right!

Sent from my E6782 using Tapatalk

 

[ILikesEmGreen]

Guess one could always change tip back to 3/8's couldn't you? Are they generic or specific to the Poulan bar?

Sent from my E6782 using Tapatalk

 

[Chris J.]

Messaged the seller about the actual bar guage. B interesting what his reply will be.

Let us know. If matching a sprocket (I'll check what's on my 5400 & my stash of odd ball spur sprockets) & chain is easy, I'll probably buy one of them.

 

[67L36Driver]

He claims it is .063" so I ordered one.

I'll keep his message on hand if it isn't.

 

[ILikesEmGreen]

He claims it is .063" so I ordered one.

I'll keep his message on hand if it isn't.

Imma need to see a mic or some feeler guages on that! Hahaha j/k

shouldn't the stamp on the bar tell that? Or he not have a good pic of that area?

Sent from my E6782 using Tapatalk

 

[Acornhill]

I bought 10 of them. He has the sprockets also (190) of them. He also has the p series oil caps for cheap. He does need help on what he actually has but it is good stuff at reasonable prices

Sent from my LG-D800 using Tapatalk

 

[ILikesEmGreen]

D*mn...

Sent from my E6782 using Tapatalk

 

[295 tramp]

Homelite collectors
https://duluth.craigslist.org/tls/5431351204.html

 

[67L36Driver]

Homelite collectors
https://duluth.craigslist.org/tls/5431351204.html

Holy cow!

 

[Ambull]

The tip is .063". IIRC they all are.

The bar itself????

If they are .058" gauge bars, lots of luck finding chain!!!

I have two near complete spools of .404 .058, and no I won't sell any of it. It is pretty much non replaceable. Only knock on .404 .063 is that is costs more per foot than 3/8" chain, and it tends to cut a little slower. Easier to sharpen

 

[67L36Driver]

I have two near complete spools of .404 .058, and no I won't sell any of it. It is pretty much non replaceable. Only knock on .404 .063 is that is costs more per foot than 3/8" chain, and it tends to cut a little slower. Easier to sharpen

Potlikker![emoji57]

They do have a Windsor tip and one could switch it to 3/8". PITA tho.

 

[Chris J.]

I have two near complete spools of .404 .058, and no I won't sell any of it. It is pretty much non replaceable. Only knock on .404 .063 is that is costs more per foot than 3/8" chain, and it tends to cut a little slower. Easier to sharpen

Yer a tease!

 

[Drptrch]

Makita. Grass Valley, Ca

http://goldcountry.craigslist.org/tls/5427682375.html


Sent from my iPhone using Tapatalk

 

[Guido Salvage]

I have two near complete spools of .404 .058, and no I won't sell any of it. It is pretty much non replaceable. Only knock on .404 .063 is that is costs more per foot than 3/8" chain, and it tends to cut a little slower. Easier to sharpen

I have less than half of a 100' roll of .404 x 58 left, only have a couple of saws that run it.

 

[67L36Driver]

http://www.ebay.com/itm/36-Poulan-S...81a7177&pid=100009&rk=1&rkt=1&sd=231829805350

Bar arrived via USPS priority mail.

Yup, .063" guage.

Windsor bar.


Both a pair of stud sleeves and an 'S' spacer to fit 5/16" bar studs.

We be smilin'.

 

[295 tramp]

That was a heck of a deal that guy had.
Glad to see someone here could benefit

 

[A10egress]

Need a USED 22" mower deck? Because $125 plus $63 shipping for a deck makes so much sense..

http://www.ebay.com/itm/Craftsman-2...141031?hash=item33a6585d67:g:kcoAAOSw3ydVsCgR

 

[J. Talley]

How about a 750$ ms391 that's used?

 

[pastryguyhawaii]

http://www.ebay.com/itm/Vintage-Jon...261383?hash=item1a0e038507:g:-v0AAOSwPc9WuSve

I was just wondering why he even bothers putting that bar with the saw.

 

[beavis331]

http://www.ebay.com/itm/Vintage-Jon...261383?hash=item1a0e038507:g:-v0AAOSwPc9WuSve

I was just wondering why he even bothers putting that bar with the saw.

Do you think it can pull that bar? Lol!