Jonsered 80 & 81

[Mr. Bow Saw]

I got this 80 in last week. It has very nice compression as you will see.
Somebody did a muffler mod with removable spark screen.
The saw starts with a shot of mix down the carb but the carb
will need cleaning and a kit.

Jonsered 80

 

[Mr. Bow Saw]

81

Yes I traded JANDG who made this post abot the 81
http://www.arboristsite.com/showthread.php?t=102108&highlight=jonsereds+81

I traded him a nice 044 stihl with 24 inch bar and new chain.
He said he wanted a lighter saw that was not so hard to start.
I thought it can't be that hard to pull. Wow when I got the saw
he was right as you will see in the pics.
Hes happy with the 044 and im very happy with the 81.
I have not started it yet. It needs a new kill switch. I ordered one
should be here this week.

Jonsereds 81

80 & 81

 

[Mr. Bow Saw]

Yes I checked my compression tester on another saw that I knew what
the psi was and its right.


Heres the saw JANDG got.

 

[dave k]

Fine looking saws with arm breaking comp as well. Great roll tip on the 80.
The Stihl elastostart help any on the 81 ?

 

[leeha]

You got a couple nice ones there Cliff.
Good luck starting them with that finger
braking compression. Do you think they
have been modded? Never seen a stock
saw with that much comp. WOW


Lee

 

[Moss Man]

Please post a video of that 81 running and idling? Those are two fine specimens. What a high compression number on that second one, I thought 210 was high.

 

[PB]

I am glad the 81 went to a collector, and was posted here in the trading post as compared to ebay. Good job JANDG!


I am very curious to see if there is any internal difference compared to the 80/801.

 

[blsnelling]

255 PSI compression?!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[stinkbait]

255 PSI compression?!!!!!!!!!!!!!!!!!!!!!!!!!!!

That's crazy ain't it!

 

[blsnelling]

That's crazy ain't it!

Absolutely amazing. Can you get that much compression without a two piece head?

 

[Saw Dr.]

I am glad the 81 went to a collector, and was posted here in the trading post as compared to ebay. Good job JANDG!

+1:yourock:

I was a bit slower than Cliff, but still glad to see that it went to someone who will appreciate it.

 

[Jacob J.]

Absolutely amazing. Can you get that much compression without a two piece head?

With thick carbon build-up, which is usually the case...

 

[belgian]

nice pair of aces right there !!! I really like the bar on that 80.
These saws have indeed awfull compression and starting is a trick on its own.

I love the way they idle...tak tak..tak.. that's idling the russian way I suppose LOLOL...

 

[HimWill]

That's a great deal for both of you,I too am glad to see the 81 is now "safe and sound".Good deal JandG for posting it here instead of on the 'bay.

 

[Mr. Bow Saw]

Fine looking saws with arm breaking comp as well. Great roll tip on the 80.
The Stihl elastostart help any on the 81 ?

Yes it does help.

You got a couple nice ones there Cliff.
Good luck starting them with that finger
braking compression. Do you think they
have been modded? Never seen a stock
saw with that much comp. WOW
Lee

The 80 may have been modded. I don't know abot the 81

 

[Mr. Bow Saw]

Well they both got there carb kits installed today. I did not have
time to do any sawing with them. The mix in the 80 is a little
thick so it smokes a bit.

Jonsereds 80


Jonsereds 81


Jonsereds 80 & 81

 

[Moss Man]

Thanx for putting those videos up, old school saws are the finest.
You done good picking up those two, I'd hold onto them.

 

[leeha]

They sound great Cliff,
They even pulled over easy considering
the compression they have.
You done good with them 2 saws.


Lee

 

[Cantdog]

Yep

I usually don't say this to a guy but "You got a nice pair there!!" Good luck with them.