Problem With My Stihl MS Chain Not Moving.

[01cummins]

So here's the story with the saw..... It's only about 2 months old and was only used about 2 days and the chain stopped moving! The saw started and reved but the chain wouldn't budge but it never bogged down. I asked my son who was using it last and he said I dunno what happened??? I checked the brake and it wasn't on so I finally just had to split it and find out what was wrong with it.


I ended up finding that the wire was broke where it was soldered to the motor. I fixed it and it worked GREAT after it was all said and done.

Here is a pic of my youngest chopping down a tree in the back yard, even though he has a bad habit of holding his left hand on the bar.

 

[Stihl-Pioneer]

Good job getting it fixed. It looks like it could use a set of big dawgs!!:msp_tongue:

 

[01cummins]

Good job getting it fixed. It looks like it could use a set of big dawgs!!:msp_tongue:

I see you're thinkin the same thing I am! :msp_thumbup:. I can't seem to find them for that saw??

 

[o8f150]

looks like it needs a skip chain too:msp_biggrin::msp_biggrin:

 

[Bieber]

didn't look at the pictures. just read first and thought what the heck is he talking about:msp_biggrin::msp_biggrin:

 

[01cummins]

didn't look at the pictures. just read first and thought what the heck is he talking about:msp_biggrin::msp_biggrin:

It's been a LOOOOONG weekend for me and I just figured I would lighten it up a bit. Thanks!