OH_Varmntr
Burner of stored sunlight
From what I can tell, it had a short but pretty rough life. Came from a dumpster at work. Previously used to cut refractory and carbon block.
Complete saw minus the recoil assembly; brake handle and a few items in the brake band linkage; and B&C. Piston deposited some aluminum on the cylinder with slight scoring. Will see how bad scoring is once I get the aluminum transfer off. Starting tear-down since I have most parts I need for rebuild. I currently have a gap in my saw lineup. I'm going from an 026 to an 088 so this MS460 will be a nice addition. :msp_smile:
Clutch got hot enough to melt the plastic drum bearing cage, locking the spacer under the E-clip so I had to cut the E-clip off to get the clutch drum off.
Complete saw minus the recoil assembly; brake handle and a few items in the brake band linkage; and B&C. Piston deposited some aluminum on the cylinder with slight scoring. Will see how bad scoring is once I get the aluminum transfer off. Starting tear-down since I have most parts I need for rebuild. I currently have a gap in my saw lineup. I'm going from an 026 to an 088 so this MS460 will be a nice addition. :msp_smile:
Clutch got hot enough to melt the plastic drum bearing cage, locking the spacer under the E-clip so I had to cut the E-clip off to get the clutch drum off.
