EPA
ArboristSite Member
Last 4 th of July I got involved in building an authentic post and beam Blacksmith shop for the Historical soc. I built this Float to kick it off in the Parade.
Next we sawed out the timbers: Here are a few:
We also had to get the foundation stones and set them:
We were fortunate to have a professional Timber frame Co in town and the owner Kyle Whithead volunteered to draw up the plans and layout the joinery.
John and I then cut the 8 posts.
We then tackled the 4 20’ tie beams and 8 rafters: Since we plan on a public raising we will assemble everything in shop first so there are NO surprises later//
Top half of Bents 1 & 2 test assembled
And bents 3& 4 assembled
This is where we are as of the Thanksgiving break. EPA
Next we sawed out the timbers: Here are a few:
We also had to get the foundation stones and set them:
We were fortunate to have a professional Timber frame Co in town and the owner Kyle Whithead volunteered to draw up the plans and layout the joinery.
John and I then cut the 8 posts.
We then tackled the 4 20’ tie beams and 8 rafters: Since we plan on a public raising we will assemble everything in shop first so there are NO surprises later//
Top half of Bents 1 & 2 test assembled
And bents 3& 4 assembled
This is where we are as of the Thanksgiving break. EPA