Gab250
ArboristSite Operative
done one for the Stihls and the Huskys now, so everyone post pics of your Dolmar saws.
Gab
Gab
Dolmar chainsaw pics
- Thread starter Gab250
- Start date
Help Support Arborist Forum:
Moss Man
Addicted to ArboristSite
roncoinc
Official Stihl Disser
Another 2 out of 3
Have a 120 as well. I still need to figure out how to post pictures directly rather than URLs.
Did some cutting with the 123 last weekend. Went through 18+ inch poplar like butter. The 133 is hardly broken in.
https://home.comcast.net/~buzzfan/sd123.htm
https://home.comcast.net/~buzzfan/sd133.htm
Have a 120 as well. I still need to figure out how to post pictures directly rather than URLs.
Did some cutting with the 123 last weekend. Went through 18+ inch poplar like butter. The 133 is hardly broken in.
https://home.comcast.net/~buzzfan/sd123.htm
https://home.comcast.net/~buzzfan/sd133.htm
roncoinc
Official Stihl Disser
sometimes i can post the pix,sometimes not..
has to do with a little square at the top that has a mtn in it and copy/paste the attachment link..
nice saws you got,specialy dads.
BTW,,poplar IS butter
Moss Man
Addicted to ArboristSite
Load them to photobucket and then post the link here, works quite well.
gmax
Addicted to ArboristSite
My 118,
gmax
Addicted to ArboristSite
Moss Man
Addicted to ArboristSite
Man, there are some fine specimans coming in!
Sachs-Dolmar 100
Just a couple of my 7900's
When she was new.....
GeoffM
ArboristSite Operative
Here are my two.
Geoff.
Geoff.
MCW
Somebody's talking crap here & it ain't the tree!
Dropped this with the 3120 but got a picture of my dad holding the 7900 and 25" bar...
And one I just took on my phone. Don't mind the 3120 attempting to sneak in
Last edited:
AUSSIE1
Al.
- Joined
- Aug 25, 2006
- Messages
- 8,004
- Reaction score
- 1,979
Crikey Matt, it doesn't look like there was much room for error.
MCW
Somebody's talking crap here & it ain't the tree!
If you're talking about that big Poplar Al it had already had the top knocked out by the pros in their high lift truck. The stump I felled was only about 6m high. Was an absolute pig as there was a 1 1/2" steel pipe running up the darker bottom centre part, hence the multi angled felling cut! Wrecked a 60" chain and still had to tow it over - that little bit of rusty pipe was tough!
It was at my local golf club. Was meant to be a 1 hour love job that turned into 6 hours as the other big Poplar stump they wanted felled was a complete mongrel as well.
Last edited:
swift4me
ArboristSite Operative
Dolmar CC 109
I'm not sure about loading photos, but the first two are of the saw when I first got it from my neighbor non-running.
After cleaning, fixing the starter, carb rebuild, making new flywheel key. Ready to go.
Great old saw, good compression, and runs great. Thanks for the help in getting it going.
Pete
I'm not sure about loading photos, but the first two are of the saw when I first got it from my neighbor non-running.
After cleaning, fixing the starter, carb rebuild, making new flywheel key. Ready to go.
Great old saw, good compression, and runs great. Thanks for the help in getting it going.
Pete
