I have for sale a husqvarna 359xp. Its a pretty nice saw but has some scratches and scuffs from normal use. The bottom of the case under the chain catcher has the most wear/ damage. Theres no cracks or breaks in the plastics. I did a base delete, port work, and muffler mod. Has the 199 carb thst I put a carb kit in and drilled a hole in the cover. The piston is a hyway piston. I dropped the original piston (2nd one I dropped) and it took a little knick out of the skirt. [emoji17] I was going to use a meteor piston but after measuring the hyway, it was almost identical to the oem piston. There was a difference of .002 from pin to crown. Everything else was the same. Actually was a nice piston for aftermarket. I put a caber piston ring, oem pin and clips in it. The cylinder had very low hours and was not scored or anything. Used hondabond ht to seal the cylinder on. The intake boot has a 372 style metal clamp on it. Muffler has a second port with a 288 style deflector. Also cones with oem dual felling spikes. I think that's it, but if you have any questions just ask. Selling as pho $425 plus the ride. PayPal friends and family or add 3% for fees. If you would need a bar and chain I probably have one I could get rid of.
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
.
.
