Got the chance of a Husqvarna saw but theres no model number, just a serial number. The number is 1006 183. It has a metal brake handle and thats about all I have to go on at this moment in time. Has anyone any idea what model it is? I know its not much to go on
Husqvarna Help!!
- Thread starter soal6
- Start date
Help Support Arborist Forum:
Boskaerm
ArboristSite Guru
Does it look anything like this?
That´s my 1983 Husqvarna 181 SE
That´s my 1983 Husqvarna 181 SE
There was a metal handle brake cover that would fit the 162, 61, 266, 268, 272 and possibly some others. There was also one that would fit the 285, 1100, 2100, 2101 and posibly some others. I believe there was also one for the 181, 281 and 288 saws. In all honesty we need a picture, or more descriptive features at the very least, before anyone will be able to ID the saw.
EDIT:
I believe there was also a cover for the 180, 280, 380, 480 saws that had a metal handle.
EDIT:
I believe there was also a cover for the 180, 280, 380, 480 saws that had a metal handle.
Last edited:
I am gonna be so jealous if you show us a 288xp for cheap.
It certainly looks like it could be a 181 or maybe a 281. But I am no expert on those models. Someone will be along to correct me shortly, though. I'll rep yer Gaelic hide when I have the bullets, tho.
Boskaerm
ArboristSite Guru
if you could measure the bore, we could come pretty close to the model!
Steveo_supremo
ArboristSite Guru
It's not a 181/281/288. Looks to me like a 162 but I could be wrong.
Boskaerm
ArboristSite Guru
I would say: not a 181 SE! look closely at the area around the gas cap, and where the line of the back handle goes up into the top cover! And then look at my pics, from about the same angle! Think it´s no 4!
I´m guessing a smaller model, since it seems to be lower than the 181SE.
Here are a couple pic's the first is a 181se
The second is a 281xp
I beleve itmight be a 161 or a 166
Mike
The second is a 281xp
I beleve itmight be a 161 or a 166
Mike
Ah I see what you mean! I've looked at a 162 on the net and it does look similar but so does some other models! Arrrgh!:help:
View attachment 191407
Thats the otherside of the saw
View attachment 191407
Thats the otherside of the saw
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,168
Yep, not a '81/88....see that little lip right above the fuel lid, 181/281/288's don't have that. Also, the size of the oil fill is too small. It could be a 161/162 or ??? Where's Niko or Spike? Tell them to get their lazy butts in here.
Boskaerm
ArboristSite Guru
looks like it has heated handles!
SawTroll
Information Collector
Some small ones as well - and this looks like a small one, most that you mentioned can be ruled out - but more pics are needed.
Last edited:
srcarr52
We can't stop here, this is bat country.
Pretty sure it's a 6 class saw. Now it's a matter of 61, 66, 161, 162, 166, or 266. I think most of the 1 series and prior saws had magnesium tanks but some of them where made long enough to be fitted with plastic tanks. Like a 61 is still produced in South American markets.
What is really throwing me off is the cylinder cover with the right side piece that covers the cylinder->muffler gap and the lack of a lip on the front over the muffler looking at the left side. Also, where is the forward cylinder cover screw? Pretty sure from the looks of the cover it's newer then the saw (and maybe aftermarket).
The muffler looks like an older tube style that would have been found on the 166 and below. I think you have a frankensaw.
What is really throwing me off is the cylinder cover with the right side piece that covers the cylinder->muffler gap and the lack of a lip on the front over the muffler looking at the left side. Also, where is the forward cylinder cover screw? Pretty sure from the looks of the cover it's newer then the saw (and maybe aftermarket).
The muffler looks like an older tube style that would have been found on the 166 and below. I think you have a frankensaw.
Stellarex
ArboristSite Operative
Looks like a 61 with a new carb cover. If you look at it close enough the rest of the saw is a duller orange. Could also be an A65, L65, ect... A couple more pics would help.
My money is on a 61 with a newer carb cover.
Newer:
My money is on a 61 with a newer carb cover.
Newer:
Last edited:
