Jonsered 930 Super

[blsnelling]

This is one of those saws that I've been watching and waiting for the right deal for a 2-3 years now. I ran CBFarmall's at a GTG a few years ago and was really impressed with it. I got this saw in the mail today and am very pleased with it. The saw is almost minty, except for someone repainting the clutch cover. It's also missing the air filter, cover, and spike. After going through it, it runs great. While apart, I tightened the squish up a little and compression is a very healthy 170 PSI.

If anyone has any leads on a filter, filter cover, or spike, please PM me. Thanks.

I straightened the louvers and painted the muffler.

New rubber oil lines.

Nice full-circle piston.

I rounded the sharp edge in the transfer intake duct. The cylinder is otherwise stock.

The exhaust port was only cleaned up.

 

[sawfun]

Excellent saw Brad, congratulations. 930 Jonnys do not come up for sale often and a complete clean one, even less so.

 

[CapitaineHaddoc]

Wow, nice saw!

 

[taplinhill]

The air filter is the same as the Jred 670/630 or Husky 61 (late) or 266xp.
The cover will be harder to find. It was only used on the 930 and 830.
Aftermarket spikes are available.

 

[Onan18]

You might want to send Spike60 a PM, he has a pile of Jonsered parts. You may luck out.

Joe

 

[bigtuna]

Brad nice grab. Also check w/ bplurst on here.

 

[RedneckChainsawRepair]

Like the cylinder design of transfer area shown.

I just got a 2095 in a few days ago with issues. Alot of similarities looking at your pics.

 

[Stihl 041S]

You finally cleaned your bench.
Well.....some anyway.





Hey Brad!!!!

 

[Sty57]

Like the cylinder design of transfer area shown.

I just got a 2095 in a few days ago with issues. Alot of similarities looking at your pics.

Mmmmmm 2095

Thanks, Brian

 

[cbfarmall]

There's an 830 cover on the bay right now.

Like the other guy said, use a 670, 630, 625 filter. Can't be a high rise filter or have the triangular peak. Has to be flat.

Chris B.

 

[blsnelling]

This is all your fault Chris!!

 

[blsnelling]

Like the other guy said, use a 670, 630, 625 filter. Can't be a high rise filter or have the triangular peak. Has to be flat.

Chris B.

So this one won't work? http://www.ebay.com/itm/Air-Filter-...720?pt=LH_DefaultDomain_0&hash=item2801ba2308

 

[blsnelling]

Brad nice grab. Also check w/ bplurst on here.

Parts sourced and already paid for

 

[Jacob J.]

So this one won't work? http://www.ebay.com/itm/Air-Filter-...720?pt=LH_DefaultDomain_0&hash=item2801ba2308

You want the one that's flat on top, not raised. The raised filter won't fit under the 830/930 cover. It sounds like you got what you need.

 

[cbfarmall]

When you show up at the GTG next week, you can leave the 930 behind and make it all a bad memory.

Chris B.

 

[blsnelling]

It sounds like you got what you need.

Bplurst took care of me.

 

[Chris J.]

This is all your fault Chris!!

No, it isn't.

Yes, I know that you mean cbfarmall.

Nice score!

 

[Jacob J.]

Bplurst took care of me.

Yeah Bryan is really good with the Jonsered parts. I have quite a few 820/920/830/930 parts as well, so if you need anything else it's likely I can set you up.

I have a few of the full-wrap handles and am working on getting the small parts for those.

 

[blsnelling]

Thanks JJ.

 

[KenJax Tree]

Nice saw Bradley[emoji106] i got my first JRed on the way....a 2260