Placing Cannon order...who is in and what do you want? Echo and Husky bar adapters as well

[fordf150]

For those that dont know. Cannon is now making adapters for P4(8mm) to S1(12mm) allowing Echo saws to accept a Stihl mount bar. They should be released for sale in 3 weeks or so and my plan is to place an order first of next week. So for anyone wanting Cannon bars or adapters let me know what you want and I will add it to the order. Please be patient with me on this since this is my first time doing anything like this.
These are the list prices for Cannon so if we get to a 20 bar order we will do 15% off list plus shipping.
Bar adapters
S1(12mm) to H1(9mm) $6.76
S1(12mm) to P4(8mm) $6.76

Cannon SuperBar Pricing
16" $86.23
18" $95.42
20" $103.59
22" $111.84
24" $121.01
28" $140.84
30" $146.85
32" $154.86
33/34" $162.25
36/37" $174.57

Bar Tips for SuperBar are $15.10

 

[BGE541]

Are the Cannon bars Stihl mount?

Ill take (3) P4 and (1) H1 please. Let me kniw where funds go, may be in for a bar or two pending previous answer, thank you again for this.

 

[Definitive Dave]

And if they are Stihl mount which size?
am I right that the main selling point for the Cannons are their durability?
Dave

 

[fordf150]

cannon bars are set prices for a given length bar. most bars are available in
.050, 058, 063 gauge
.365, .325 , .375, .404

bar mounts for cannon bars are a kind of universal
C1 replaces k041, a041, a095, k095
H1 replaces D009
S1 replaces D025
S2 replaces D033, E033, E031
P4 replaces D176.....These are the Echo mount bars and take standard Echo DL counts

Just let me know what pitch, gauge, length, and mount you want and i will get the part number figured out for it.

 

[fordf150]

And if they are Stihl mount which size?
am I right that the main selling point for the Cannons are their durability?
Dave

Yes durability is the main selling point.


I just listed the prices for a given length of bar. You decide what mount you want.

 

[fordf150]

here is the Cannon application guide. I will try to find the bar mount chart and post a link for anyone that isnt familiar with Cannon.

 

[fordf150]

 

[SawTroll]

P4 replaces D176.....These are the Echo mount bars and take standard Echo DL counts

Just let me know what pitch, gauge, length, and mount you want and i will get the part number figured out for it.

Are you sure about the dl counts? Cannon often lists non-stardard ones in the other mounts.....

Edit, Cannon lists the standard D009/D025 dl counts on the H1 and S1 bars in 20 and 24/25" - but often not with other Husky/Stihl configurations.

 

[fordf150]

Are you sure about the dl counts? Cannon often lists non-stardard ones in the other mounts.....

I am going by what they told me last week when i called in. 70DL for a 20" and 81DL for 24" bars. They do not have them listed in their catalog yet.

 

[BGE541]

*STUPID QUESTION*

If I run a 24" Stihl bar on the Echo do I use Echo or Stihl DL counts?

Thanks

 

[fordf150]

*STUPID QUESTION*

If I run a 24" Stihl bar on the Echo do I use Echo or Stihl DL counts?

Thanks

Stihl. Thats part of the appeal of using an adapter on the Echo saws....getting rid of their odd DL count and switching to something common

 

[KenJax Tree]

Like my .058 bars[emoji23]

 

[weedkilla]

I had some pics of the c1 combi mount bar setup in this thread -
http://www.arboristsite.com/community/threads/husky-small-mount-bars.282759/#post-5443093
Might be helpful to someone looking at a bar for the smaller echo saws.

 

[fordf150]

I had some pics of the c1 combi mount bar setup in this thread -
http://www.arboristsite.com/community/threads/husky-small-mount-bars.282759/#post-5443093
Might be helpful to someone looking at a bar for the smaller echo saws.

Can you answer this question...what tooth tip is on the supermini with 3/8lp? I dont have one to count and cant find any mention of it from cannon. Are they a 10T nose?

 

[weedkilla]

No idea - but I'm happy to count the 325 nose that I have if that's of interest.
I'll see if I have anything with a 3/8lp nose with the same profile.

 

[fordf150]

No idea - but I'm happy to count the 325 nose that I have if that's of interest.
I'll see if I have anything with a 3/8lp nose with the same profile.

it got answered. 9T. Thank you

 

[zogger]

I am going by what they told me last week when i called in. 70DL for a 20" and 81DL for 24" bars. They do not have them listed in their catalog yet.

Ran into that exact thing today with a poulan branded but husky large mount bar in 24 inch, takes 81 drive links, not the standard 84.

Dang, maybe should have waited, but already scored a new bar today. Next time! Those cannons look good! GLWS man!

 

[Deets066]

I'll take a 42" cannon lightweight for large mount stihl

 

[fordf150]

I'll take a 42" cannon lightweight for large mount stihl

Lightweights are coming in the spring from what I was told. That's a long time to wait.

 

[Deets066]

I know, just messin with ya