Porting a 066BB

[blsnelling]

asdf

 

[gink595]

I think my stock mahle cylinder was at 96*:monkey:

 

[blsnelling]

asdf

 

[gink595]

Yeah, I think Timberwolf has commented on how the timing has gotten higher in the last few years. I just don't like to see much higher than 100 on a work saw. We'll have to see what compression is.

That one was an old cylinder without the decomp. I don't know what the newer stock cylinder I have is at.

 

[blsnelling]

asdf

 

[gink595]

I'm off to the grinding bench, to try and build another slow saw

I have complete confidence in that!

 

[Double A]

These kits have a come a long ways.

They may have come along way, but they still look like alot of work! No big deal for a pro port grinder like you, plus you might make a few more bucks with the added grinding. The average guy might be better off avoiding this cylinder and go to the OEM. Are you going to have someone else build one also for a real comparison?

 

[little possum]

Subscribing to see the finished pictures :monkey: I got to learn how to throw metal shavings sometime.

 

[mowoodchopper]

Interesting. That would certainly be an old cylinder if it didn't have a decomp.

I'm off to the grinding bench, to try and build another slow saw

At least your your honest! You could save yourself the time and just set the carb way lean that way it makes lots of rpms and no power.

 

[gink595]

They may have come along way, but they still look like alot of work! No big deal for a pro port grinder like you, plus you might make a few more bucks with the added grinding. The average guy might be better off avoiding this cylinder and go to the OEM. Are you going to have someone else build one also for a real comparison?

Brad's comparisons are taking video's off the internet and then taking a poll on which is faster

 

[blsnelling]

asdf

 

[blsnelling]

At least your your honest! You could save yourself the time and just set the carb way lean that way it makes lots of rpms and no power.

Brad's comparisons are taking video's off the internet and then taking a poll on which is faster

Would it be remotely possible to keep this on topic, rather than trolling for more trouble?

 

[Double A]

Shouldn't the lower transfer be matched to the case for best flow?

[/QUOTE]

 

[gink595]

Would it be remotely possible to keep this on topic, rather than trolling for more trouble?

I didn't troll the last thread...You did! But, you seem to have no problems trolling other peoples thread...Need examples???

Besides the answer I gave was a honest answer to a question that was asked.

 

[blsnelling]

I didn't troll the last thread...You did! But, you seem to have no problems trolling other peoples thread...Need examples???

Besides the answer I gave was a honest answer to a question that was asked.

Gink, all you're doing is proving my point. You're trying to cause me trouble with no cause at all.

 

[blsnelling]

asdf

 

[blsnelling]

asdf

 

[gink595]

Gink, all you're doing is proving my point. You're trying to cause me trouble with no cause at all.

Well Brad, What is it that you mean? Did you not petition to get Ecopsey banned or myself and probably others? Something about a snake comes to mind

 

[Scooterbum]

Doesn't this belong in the "Modded Work Saw" forum?
Isn't that what it's for?

 

[indiansprings]

Scooterbum, exactly what I was going to say, it's in the wrong forum, the modded work saw forum is exactly where it needs to go. Seems like it would at least keep the hell raising to a forum thats not viewed by that many.