690 Solo
- Thread starter spacemule
- Start date
Help Support Arborist Forum:
One or more guys have the saw. This thread is almost a year old :
http://www.arboristsite.com/showthread.php?t=12932&highlight=solo+690
Don't know if they are still available.
Ray
http://www.arboristsite.com/showthread.php?t=12932&highlight=solo+690
Don't know if they are still available.
Ray
max2cam
ArboristSite Guru
spacemule said:Has anyone used one of these $449 reconditioned 690 Solos? Sure is cheap.
That's where I got mine almost 2 years ago. The "reconditioned" line is somewhat misleading. They are demos or returns. Mine had some "abuse" issues right out of the gassy box but Solo HQ provided the parts and I brought it up to date. It was a little intimidating at first due to its size (90cc), but I've come to like it very much and it's a blast to run for the deep-throated howl it makes alone. The Two Year like-new warranty is no joke: (See SoloKleinMotoren thread.) Guys will warn you that dealer support is very thin, which is true, but I didn't care because I do my own work anyway.
max2cam
ArboristSite Guru
That's dumb of them. Glad I got mine when I did. Hope it runs forever. I've got a lot of nice red pine to mill.
SawTroll
Information Collector
690/694 ?
What's the story of 690 vs. 694. Which saw is replacing who. Are they going to drop the Dolmar-made 694 in favor if a selfproduced 690??
What's the story of 690 vs. 694. Which saw is replacing who. Are they going to drop the Dolmar-made 694 in favor if a selfproduced 690??
In the US, I believe the 690 is now an obsolete model. It is being dropped in favor of the dolmar made 694. I dont know if it is due to emission issues or something to do with production/sales.
max2cam
ArboristSite Guru
brent denny said:
When I got mine, the word was going around that it was due to emission issues, but I can't prove that's true or not. I noticed on the Bailey Solos they said "Not for Sale in California" and now they have phased those out too.
max2cam
ArboristSite Guru
Solo 690
7.4 hp
Solo/Dolmar 694
6.7 hp
But who knows how accurate those figures are.....
7.4 hp
Solo/Dolmar 694
6.7 hp
But who knows how accurate those figures are.....
SawTroll
Information Collector
I have read a lot of saw tests at the dlg http://www.dlg.org/de/landwirtschaft/landtechnik/pruefberichte/forstkommunal.html and kwf (not availiable at the moment) websites. It is highly unusual thet the variation between test result and factory stated power output is more than +/- .1 kw. . In fact, I remember only one such case, maybe two, where it was -.2 kw.
There is nothing about the Solos in question at these sites though.
No, I don't know how many saws of each model they test, and how they handle break-in. Maybe someone else knows?
. In fact, I remember only one such case, maybe two, where it was -.2 kw.There is nothing about the Solos in question at these sites though.
No, I don't know how many saws of each model they test, and how they handle break-in. Maybe someone else knows?
Last edited:
SawTroll
Information Collector
According to CSCC the changeover from 690 to 694 took place in 2001.
Does anyone know which market CSCC refers to, regarding time of introduction and discontinuation ?
Does anyone know which market CSCC refers to, regarding time of introduction and discontinuation ?
Last edited:
max2cam
ArboristSite Guru
Funny that the Solo isn't listed on that dlg.de website. It's a German made saw and it's a German website afterall.
In the sales literature I received from Solo almost two years ago, the 694 was already listed and NOT the 690.
In the sales literature I received from Solo almost two years ago, the 694 was already listed and NOT the 690.
njforestfire
ArboristSite Operative
Any dealers in the northeast for Solo?? I would love to learn more about these saws, as I've heard nothing bad about that actual saw itself.
Marky Mark
Hell's Kitchen Trapper
I know where there are a few brand new ones. Just waiting for porting work. Here's a new 680 run about 1 minute. AWHH Look at that bar.
http://www.arboristsite.com/attachment_17441.php
Just waiting for porting work. Here's a new 680 run about 1 minute. AWHH Look at that bar. http://www.arboristsite.com/attachment_17441.php
njforestfire
ArboristSite Operative
MM, nice saw! In your opinion, good saw to run with? You have a few in your possesion?
solo 651 --
wow ... the solo 651 looks like a pretty nice saw - 4.0 bhp out of 51cc. If the powerhead actually weighs in at the advertised 10.8 lbs ... that should give the 260 a run. (the 260 is rated at 3.5bhp) I called Solo, and the woman said that the 651 was discontinued, not that I could have afforded one.
what's going on ... Dolmar drops the 5200i, solo the 651 ?? ??
wow ... the solo 651 looks like a pretty nice saw - 4.0 bhp out of 51cc. If the powerhead actually weighs in at the advertised 10.8 lbs ... that should give the 260 a run. (the 260 is rated at 3.5bhp) I called Solo, and the woman said that the 651 was discontinued, not that I could have afforded one.
what's going on ... Dolmar drops the 5200i, solo the 651 ?? ??
TonyM
ArboristSite Guru
I don't think the 651 is discontinued. They have them listed on the Solo usa website. The Michigan distributor, Rottmans Sales, has them listed on their Solo flyer. I bought mine for about $400 with a 16" bar, so the prices at the Solo website are high. It will at least cut with a MS260, and I feel it will outcut it, but some disagree. It's a little coarser feeling saw, not quite as refined. I just came from the woods, and I was eating through 12" black locust with my ported 651 like butter. I love it. Firewood doesn't stand a chance!
.png "Love :heart:")
Greg Carberry
ArboristSite Operative
It may be the 651SP that is discontinued. I know my distributor has dropped it and now picked up the 651 in its place. They are nice saws but Solo's marketing is terrible.
Similar threads
