sawinredneck
Addicted to ArboristSite
I have been threatening to post pics, so here we go!!!!!!
My splitter project!!!!!
- Thread starter sawinredneck
- Start date
Help Support Arborist Forum:
sawinredneck
Addicted to ArboristSite
And more, I think we can all figure out who tnhe one pic is for:rockn:
Freakingstang
Doctor Freakinstein
wow, looks tuff. Is that a 3" cylinder? Hope you got a pump to run it and keep decent cycle times. I then hope you have a motor to turn the pump.
-Steve
Edit, you didn't have a first post when I originally posted. Cool. A 27 hp Kow and liquid cooled to boot! Looks like it will be fun. Now, how bout the pump? lol
-Steve
Edit, you didn't have a first post when I originally posted. Cool. A 27 hp Kow and liquid cooled to boot! Looks like it will be fun. Now, how bout the pump? lol
Now that the best log splitter picture yet..
sawinredneck
Addicted to ArboristSite
Freakingstang said:
5.75" bore 3.5" rod, going with a 28gpm two stage, shouldn't need to go much past idle!!! I tried to tell you all it was SICK!!!!!
Andy
sawinredneck
Addicted to ArboristSite
04: the brown bottle is the 3L, took me 5 years to find one!!!
sawinredneck said:
Have one sitting right here in the box.. won it in a raffle.. never opened also a friend has a full 3liter that he bought on ebay for 125.00 for export
DDM
Addicted to ArboristSite
With that 27HP Kawi you shouldnt have any problem moving the pump.
sawinredneck
Addicted to ArboristSite
DDM said:
That is what I am hoping for!!! I was going to go with the 16gpm single, but was told it wasn't a good idea!?!
Andy
DDM
Addicted to ArboristSite
You might want a 28GPM you have the power to push it.
sawinredneck
Addicted to ArboristSite
DDM said:
That is what I am going with now, a 28gpm 2 stage, I was going to go with the 16gpm single stage until I was talked out of it.
Andy
DDM
Addicted to ArboristSite
Make sure you get a high enough flow valve with 3/4" ports otherwise you will be defeating pump.And a large resevoir.
sawinredneck
Addicted to ArboristSite
I hbave an 18 gallon res. to use, the valves, well................... I have two set now, one set has 5/8" port openings (thread size). The other set, I have never seen anything like them before!!!!!!!!!!! 1 1/2 feed 7/8" ports. Methinks that is overkill, but the others seem a little small?
Andy
Want pics?
Andy
Want pics?
DDM
Addicted to ArboristSite
I like pictures of the large one!
sawinredneck
Addicted to ArboristSite
Here ya go!
sawinredneck
Addicted to ArboristSite
What? No suggestions on which valve to use?
Andy
Andy
DDM
Addicted to ArboristSite
sawinredneck said:
I'm still trying to figure out what the big one is.:hmm3grin2orange:
sawinredneck
Addicted to ArboristSite
DDM said:
It came off a trash truck, any more than that you are on you're own!!!
Andy
DDM
Addicted to ArboristSite
looks like you have a 2 spool and a single spool.The single appears to be a running as some type of priority off the 2 spool. Take it to the car wash LOL
sawinredneck
Addicted to ArboristSite
Ok, car wash and the reseal kit I have for the twin spool, that I can split for a single, but which do I use? Oversize? Or questionable?
Andy
Andy
Similar threads
