McCulloch Pro Mac 850 Carb Question
I recently purchased a McCulloch Pro Mac 850 from Craigslist, and was trying to check it out and get it running well.
It has good compression. About 170 psi on my compression tester, and has spark as well. It ran to some degree when I got it home, but wouldn't stay idling, and seemed very rich when it revved up. I adjusted the carb needles a little, and now can't get it to start. It will hit a few times, but not stay running. It has a Zama carburetor. Does anyone know how many turns off seated the "base" setting for the carb should be on this saw? About 1 1/2 turns?
Here are a few pictures of the saw.
I recently purchased a McCulloch Pro Mac 850 from Craigslist, and was trying to check it out and get it running well.
It has good compression. About 170 psi on my compression tester, and has spark as well. It ran to some degree when I got it home, but wouldn't stay idling, and seemed very rich when it revved up. I adjusted the carb needles a little, and now can't get it to start. It will hit a few times, but not stay running. It has a Zama carburetor. Does anyone know how many turns off seated the "base" setting for the carb should be on this saw? About 1 1/2 turns?
Here are a few pictures of the saw.
Last edited: