056

Seeking advice on an eBay purchased 056 super, this saw has turned into a basket case. The saw runs with an erratic idles and has a terribly loose crank shaft, so I have acquired both the starter side bearing and the drive side sealed bearing. When I brought the sawto my local dealership they...

Hi all at AS. Is this from an 056? Condition unknown but the coil reads 2k so assume that part is good. Is it worth anything,located in Aust. Cheers in advance Chris.

I have a couple 1115 saws, one with a good SEM another with a good Bosch. I have heard of different fixes people have tried and I was wanting to get my hands on some 056 Bosch Modules that are junk to learn more about fixing them. I'm open to bartering or what not. Looking to build some...

Hey everyone, I've been rebuilding a Stihl MS660 and I'm about to the part of getting a piston to throw in it (piston cracked from previous owner failing to buy a piston stop), and I started thinking about how I see other people transplanting pistons from huskys to stihls and vise versa, and it...

Stihl 056 in possibly running condition. Was part of deal and don’t have time to tinker with. Looks to be a super or magnum based on side exhaust. I was told it was running a couple months ago. Pull cord is gone. Should be easy fix. $225 pho or $260 with decent 25” bar see model# in pic...

So here is another collection worthy Saw I am selling for my buddy, it's a 056 Magnum with 36" Bar and chain with quickstop chainbrake, and full wrap handlebar, real clean And if the deal falls through there will be a half wrap 056 Magnum II. He's looking to get $600 plus the ride to you for...

My camp in Danville, Virginia was broken into...the coward stole all my hunting ammo and my beloved, Stihl 056 Magnum II. The saw was recently rebuilt and has unbelievable compression. The top cover was taken from a parts saw and is unbroken unlike all the others I've seen. Most likely the...

My dad has an old 056 that he hasn't used for years....a few months ago he decided to take it to the shop and get tuned up just for the occasional use. The mechanic said the cylinder looked fine and he actually had it running, but that he was pretty sure it needed a crank bearing and that they...

Hello everyone! I've got a question for the pros. So here's the deal...I am getting into milling trees for my own wood working projects. Since bigger is always better, I searched around and found a beat up non-running 056 av super electronic for 100 bucks. Looked like someone ran regular gas...