090

Good used cylinder in decent shape, couple little chips but the exhaust port, nothing a little foredoom work can’t cure. Has a helicoil in the plug threads. If anything it’s a good hot saw jug

Hi guys. Today I was milling for the first time with my farmertec 070 clone and noticed the spark plug boot was smoking. I popped it off and the inside was melted. I’ve had a number of issues with the saw already and I know they’re to be expected with China junk but I didn’t expect this. Any...

All the usual suspects, take-offs, broken or that your done with now. Any 1124 or any large saw parts for Stihl will be considered. 075/760, 105s, 050, 051, TS510, 070, 090, ect... If you have an add here listed I've seen it already. Plastics Starters and parts Clutch covers Oil pumps working or...

Hi there just wanted to get some opinions about what’s a decent price for a good running 090? The top end was rebuilt with oe parts a few years back, has one small repair weld on lower handle. Come with like new 41” stihl bar. I see prices all over the place for these things. 3k - 1k ?? It’s a...

Hi there just wanted to get some opinions about what’s a decent price for a good running 090? The top end was rebuilt with oe parts a few years back, has one small repair weld on lower handle. Come with like new 41” stihl bar. I see prices all over the place for these things. 3k - 1k ?? It’s a...

Looking to purchase a saw as a back up to my 070 as I rebuild it. Been in high demand lately. Located in South Carolina.

So today I was milling up some spalted maple with my 070 and 36” bar and I noticed it lost most of its power on the last cut. Feels like the piston and rings are going... I’ve got a 070 that may be a franken saw with Chinese parts sprinkled in but it’s been running like a champ up until today...

Ive come across what looks to be a nice looking 090 for sale. The problem is that the seller doesn't know what he wants for it. I have an idea but I dont know much about 090's, and am not confident, so I am coming to the experts. I will be using it for milling. Notes: Comes with 4 foot and 5...

Got out and did some milling on the weekend. Realized that we really do need a bar in between 36" and 60". The 090 ran great, the chain was cutting good too, got 5x 2" thick slabs out of this, then went for a swim in the lake to wash off all the sawdust.

I'm currently running a 48" Alaskan mill with a Stihl 075, and a 42" bar pulling .404 chain. The 075 has been problematic ever since I've run it; the excessive vibration causes the saw to lose bolts, despite my best attempts to apply locktite and keep everything cinched down. The saw has...

Looking for large mount bar 42" 3/8 .063. So far I've bought 4 bars on eBay the people claimed were large mount that fit Stihl 070/076/084/088/ 090/ and MS880. Everyone of them has been the small slot for the smaller saws. Getting VERY frustrated. My 36" bar is too small milling and need a...

I was looking on the tradin' post this morning and noticed someone was selling a 25" and 30" .404 bar for the larger Stihl saws and there seemed to be some sparked interest and they seemed to have sold. I was wondering what a guy thinks he could get for a used Stihl bar and what ones are worth...

Hi friends! I am selling my Stihl 090 chainsaw. I’m not sure of the exact year this saw was manufactured, but I believe its from the late 70’s or early 80’s. It is the non-AV model, but it has a full wrap handle. Its 137 CC and weighs about 26 lbs with no bar. It has a manual oiler. It has no...

Hi all at AS, Does anyone have a pic of what type of decal goes here. Is it 090G? I believe this saw is an earlier version than the 090AV,which has the 2 metal tags. Cheers in advance,Chris.

I'm new to this site other than coming here to read old posts when I need info that I can't find elsewhere. So I'm not sure if this post is going to be in the right place on the site but here goes nothing. I have a Stihl 090 that I purchased and was going to use it for milling but before I had...

Hi all, I had the luck to acquire a model 1106 Contra yesterday. It's old and used, but all there except for the top cover (same as 070 and 090 if I'm not mistaken?). I realise I'm looking for a very hard to find item, on the other hand I realise there are people who restore these saws and the...

I bought an 090 (says made in West Germany) off of fleabay, came with a 5' bar and chain in 1/2", can anyone help me eith what it is worth? OR is it worth keeping? Bought the saw for milling slabs, have a cannon 6' with the 404, thinking it is obviously wise to stick with the 404. Was...

Stihl 090G (Vintage- Collectible) Chainsaw with Original Manual Up for sale one 090G Stihl Chainsaw with Original Manual This is the rarer model G (Gear Drive) This is the model they used as a milling saw and felling saw. I can not find another saw setup like this to compare price. I've been...

Longtime lurker and new member here! I'm finally moving to a new property where I have a use for some big saws (and an excuse to get my dream saw) Looking for two saws. First, 880. Stock or work modded (not race) ~24" solid and ~42" lightweight bars preferred, but I can always source those...

Just look at that clutch http://www.huztl.net/Free-Shipping-105-7cc-Holzfforma-Chainsaw-Power-Head-Parts-Compatible-With-STIHL-070-Chain-Saw-p435087.html I am going to go ahead and start this thread. The kits are expected to be ready no later than 1st part of May and then a little...