346xp

Just had the local shop put new carburetor on it. Now it wont idle. Not a lot of power. Air leak, I think. Screw hole for oiler assembly screw is stripped. Older model, occasionally used hard, home wood lot. So maybe ring, bearings? I don't have tools or time to rebuild but I love the saw. Is it...

Husky 351 that I put a OEM NE 346xp p & c kit on. Built this one to keep and had about 2 tanks through it when I came across a screaming deal on an MS 362 that I think fits my 1-saw-plan a little better. Other than the p & c kit the saw is stock/oem replacement. New metal intake clamp and new...

Hi, so I’ve done quite a bit of research on this, but there’s so much info out there and a few variations of these saws. So my question is, what’s the right kit to put on the 351/350 saws? Oem? Which is the good one,44.3? Supplier? Some of the flebay sellers can’t even tell me what dia bore the...

Howdy folks! Putting up for sale my husky 346xp new edition. The saw runs and cuts perfectly, it needs nothing and would be ready for a day in the woods tomorrow. It has great compression. Made in Sweden Would be a great firewood or limbing saw! $375+shipping Thanks for looking!

Still looks like new and this thing outcuts my big bore pop up 372XP with ease. Check out the build thread and send me a PM if your interested in owning this sweet like new Snellerized 346XP OE. Really hate to part with this beauty but my dog needs heart failure meds and treatment. The lil guy...

Edit - the title is supposed to be ‘OE’ instead of ‘or’. I just got a 346xp relatively cheap - some parts need to be replaced but it’s a solid runner other than that. My question is whether anyone has seen a 2 ring piston in these before? Best I can tell, without having pulled the cylinder yet...

I would REALLY prefer a local pickup as I have a lot of complete builder/parts saws, and a lot of loose parts (new cylinders, pistons too for these models). I live in 21042 Maryland, but can travel if someone is serious within reason. I have to move in the very near future, and will not need all...

Just picked up a 346xp used and it's a gem. After the first day of use something happened to the idle where the chain won't quit moving. I adjusted the T screw and all that did was make it die, chain kept running. Is this needing a more fine tune on the carb? Not really proficient with carb...

Title pretty much sums it up and I've done the research on HOW to do it. Still probably going to get stuck lol. I was wondering who out of you have handled a ported 346xp, I mean out of the box the engines rpms mac out at 14,500 which is already insane. Curious on your thoughts on the project...

Hello, I just made an account, but I've lurked for a few years. I recently bought a used 45cc 346 on ebay for probably $100 too much, but definitely too much since it's given me nothing but issues. For the last year or so I've been bucking and felling with a Husqvarna 460, but I got tired of...

I have an older 346XP that came with chain which has holes in the drive links. I bought 2 new chains that fit the saw at the local lawn and garden center. The new chains have no holes in the drive links. All the chains and the bar are .058. The new chains overheat and seize up quickly when I try...

Well my first time selling in a long time..... Jonsered CS2145 chainsaw. Saw was completely broken down and rebuilt and brought to Jonsered CS2152 specs using the best factory parts. This saw does not have the magnesium cases of the 353/CS2152 saws. They use the same piston and cylinders of...

look at the link below, every thing from ancient Mac's as well as Sachs (Sach 110 worth anything?) see something you like let me know I can bid and ship for you. Serious no BS'ers only as If I bid and win I have to buy. shipping would be USPS from my base to you so shipping is cheap. There...

My dad took his back, so its time i get my own. I have about 400 I'd be willing to put toward it. 49630 zip code

So I got a Husqvarna 350 for $100 non running as is. I thought it was a decent deal so I went ahead and picked it up. Now I've started tearing it down for a rebuild and wanted to get some opinions on what route to take I see a lot of people building them into a 346xp, I'm leaning towards this...

Looking to trade my like-new 346xp oe with less than 10 hours of run time for an older 044 super or 440 mag. Would also consider 036 or 362. Mostly just looking for a bigger Stihl saw than 50cc. Must be in good condition, ready to work.

Bought this 346 off fleabay for a song a while back with the intention of rebuilding it. It was a runner but apparently it took a fall or a log fell on it because the top cover was missing and the cylinder was missing almost half of the fins. I had been looking for a 346 project for a bit...

Howdy, New to the forum but I've been researching this saw on this forum extensively for about a month. Here's the story: I decided of the "new" saws I was considering I figured the 550xp was the best suited for my needs, wanting a pro saw thinking it would be resilient and naturally I made...

Hey guys quick question I'm trying to gain more power out of my husqvarna 445 it is a 2008 model factory jug and piston is a 42mm I was thing about putting a jug and piston for a 450 on it wich is 44mm any thought or suggestions on this.

I am now in possession of another 346 and this time it's a dandy MMWS version. However I bought it PHO. I plan on running an 16"x .050"-3/8"pitch bar on it. What I'm torn on is an Oregon Powermatch, Husky Techlite or Total/Tsumura (possibly light). We do a lot of limbing here as the trees have...