372xp

Hey guys, I'm wanting to put a side exhaust port on my 372 muffler instead of the top port... tired of it burning my hand when I've got the bar buried bucking big logs. What size should the exhaust port be? Not really looking to get max power, but a performance boost would not be unwelcome...

I am wanting to convert my 372 high top (HD filter) to low top. I bought the following parts to do the swap: COVER 503 62 80-01 HOLDER 503 62 75-01 AIR FILTER 5114550-01 Question is, after ompleting the swap, will I need to adjust the carb ? If so what might need changing, low jet, high jet...

I’m decent with saw maintenance, but before I tear this thing down… I regrettably had to get a loan on one of my saws at a pawn shop a couple months ago, and forgot to drain the gas before I left it there, I got it back today and it started fine, ran fine, but I got it home and had it laying on...

Looking for a good to great condition 272xp top cover. Thanks!

Hi all, I’ve recently bought a Redmax GZ7100 (I believe these are 372xp clones) powerhead. I also bought an Oregon 280RND176 guide bar to put on it. However I’m questioning the fitment of this guide bar. Before purchasing it I reached out to the support on Redmax/Husqvarna and they said a D176...

Will the non x-torq top covers fit on a x-torq model? or is there a clearance issue?

Picked up this 365 Special quite a while back that had a crank seal leak and just finally got to it last night. Excited to fire it up and get it in some wood soon! If it ever dies I do plan on throwing the 372 top end on it but until then what should i do with this thing? Already has a muffler...

Need some input. I have a brand new 2001 372xp that has never touched wood. It has been started every year or so to keep things fresh and moving but spent its life on display. The saw was given to my dad as an award back in 2000 and he decided right away that he would never run it...

Saw has been diassembled and cleaned. Reassemble with new gasket and rings. Carb has had kit installed. This saw has only been started and adjusted. Look at pics close! PHO $285 shipped to lower 48

Hey there, seem to find myself having some different numbers here that don't make a ton of sense to me.. Feel like I may be missing something. Just picked up a fresh 372xp and a 268xp piston to drop in it, when I measure my squish from with the stock piston i get .038 (which seems pretty good...

I would REALLY prefer a local pickup as I have a lot of complete builder/parts saws, and a lot of loose parts (new cylinders, pistons too for these models). I live in 21042 Maryland, but can travel if someone is serious within reason. I have to move in the very near future, and will not need all...

New in the box w/20" .050 bar and chain and tool pack. Stored in climate controlled area since new buying back in 2009. $1050 PayPal plus shipping to your location. $1k plus shipping otherwise. NW Ohio pickup. Has been several years since posting on here so limited posts on this newer forum...

I just closed a deal for €110 for a second hand husqvarna 372XPG. Is it easy to work on? It looks like it's been neglected for the past few years, probably needs some attention. I know how to do th basic things to a saw, carb, spark plug, cleaning muffler etc... Any tips? Thanks in advance, Jan

So I own 2 288’s among a few other 2 series , a 97’ I bought new and a 90’ Ks non decomp I revived. I recently bought an “OE” 2008 372xp. My question is... Do I keep the 90’ or the 372? I don’t “NEED” nor will I use to they’re deserved potential all these gems. The 372 as I said is recent and is...

Maybe keep engine cooler n combusting better. I know most cutters live in a cooler climate. But in a hot environment? How can extra cooling be a bad thing. Especially on a completely closed air box, with an engine I expect to perform n create heat. I might go a bit bigger hole n line the...

It’s a 372 clone build. It recoiled when I first built then the rope broke. Replaced that and the spring was chinsy so I replaced. Now the dang thing won’t retract. It retracts off the saw just not installed against flywheel. Any suggestions or advice is welcome. At my wits end with this...

New crank bearings, gaskets, seals, oem piston, rings. Runs and oils as it should. It does have some blemishes but should be a good runner. Would like $375.00 shipped to you.

So I recently came across a 372xp and I've been very excited about getting it running. I got rid of my faithful 441 and I always compare the two saws. The 372 seems like it has a better stronger engine (I see it compared to the 462 more). But besides the engine, the 441 seems way better...

I have this 372XP I am trying to help my buddy sale, It has seen quite a bit of use and it is no shelf queen by any means, but I does look pretty good considering. He cleaned the saw up and when it was apart removed the skirt obstructing the transfers as well as widened the exhaust outlet, he...

Need to replace bar and chain. Currently have stock 20’’ / .058 / 3/8. Sprocket- power mate 3/8-7 Question- can I change to 20”/ .050/ 3/8 bar? I want to get a higher performance bar, but they seem to be harder to find in the .058. Same with chains. Thanks! kinda new to the game learning fast...