carburator

Here’s the video of what the saws are doing. It started after I took the oil pump off to look for worn parts due to a small leak. The clutch was on a little tight so I had to throw some starter cord in the cylinder to keep it from spinning and ended up breaking the clutch and getting it off. I...

I have a Stihl 024 that I’m working on, and I’m scratching my head on tuning it. The carburetor has a new rebuild kit, and I believe the metering lever is the correct height. The initial settings are one turn out on low and high, but it wants to run at 3/4 turn out on the low side. When I turn...

I'm making a budget bandsaw mill. Got a V-twin Briggs and Stratton Vanguard 16hp horizontal really cheap, only £50. Taken it apart, looks in good condition inside, dated to 1993 but not ran long I reckon, just simple fixes as they'd not changed the oil, ran it and it wore the cam shaft back in...

Used HDA 120. Runs fine, pulled from 262 XPG and replaced with an 87. $40 and shipping. Thanks. -Garrett

Hello.I got a Xenoah chainsaw from a friend, but i don't know where the H needle from the carb is.It is a walbro wa9 carb, I searched on google but no results... any ideas where can i get a whole carb or just the needle?Can you give me more info about this saw?

Okay so I’m trying to learn more about my saws and play around with them I have a ms170 and 290 also which are fine but my ms250 I took the carburetor out and remover the limiter caps on the h and l screw and I can’t get my saw to run smoothly no matter how much I turn and play around with the...

i have a beautiful 181se im trying to get running good, i noticed when replacing the fuel line that the plastic inlet on the carburetor could be moved up and down, is this common or is something loose? It does have a weird run condition and the saw doesnt look like it was used enough to have a...

So I have 3 chainsaws - 1 poulan, 1 homelite, and 1 husqvarna. All are residential saws, all I dislike to a varried extent. It seems to me, the big problem with these saws are the carb/air filter assembly. Their pretty ******. So I was wondering if you could upgrade to a pro carb and filter. I...