farmertec

Hello All, Long time reader, first time poster. I wanted to warn everyone of the underhanded tactics Farmertec utilizes. I like most other people, could not afford a big saw for the little work i was planning on using, and could not even afford a used big saw that i could find. So i was...

Hi guys. Today I was milling for the first time with my farmertec 070 clone and noticed the spark plug boot was smoking. I popped it off and the inside was melted. I’ve had a number of issues with the saw already and I know they’re to be expected with China junk but I didn’t expect this. Any...

I smoked my cylinder on my 660 clone while milling by having the high adjustment too lean. Now I am holding a new 36$ knock off cylinder in my hand and have just ordered a degree wheel to check timing. By just measunring with the calipers I can tell that this cylinder is way off compared to the...

Hello Any of you guys that have read any of my threads and subscribe to my channel on youtube are invited. I have started a WiresX room where Hams/Chainsaw lovers can actually talk together. You need to be a licensed Ham. Any license level and have a C4FM digital radio. I have everything active...

I've been shopping around for a 660 kit with the intent of slapping it on my granberg 36" mill. Seems there isn't a lot of sellers on ebay and there's no way I'm buying directly from farmertec. Yes, I know these saws aren't what a stihl is, but I like tinkering anyway so I'm fine with it. I'm...

I'm currently building a farmertec 070 clone and I wanted to use the bigger bore 66mm cylinder for the 090 conversion, for extra ccs for milling, but I wasn't happy with the farmertec cylinder quality for the 66mm (the 58mm was much better). The finish outside was splotchy and the ports weren't...

Hello! I have noticed something that may or may not be an issue with my cylinder wich I just got from farmertec. the issue being that there is a lip on the cylinder head wich is between 0.4-0.6mm tall(Fig 1). If I was to sand this away I would end up with a 0.6-0.7mm gap on the exhaust port...

Just wanted to share some photos of the Farmertec MS461 Cylinder I received today. Planning to learn how to port, so bought the AM parts to practice on for $19 shipped instead of OEM for $226 on EB. The Farmertec casting looks much more refined than OEM, but he machining is quite lackluster...

Is this a mean purple machine or is it blue? I just got one last week. It is exactly the same as the kit just blue and without the opportunity to improve it. I see where the rotor still breaks. Do you disassemble it for preventive stuff or run it until its done? I could smell gas, maybe they...

I am kicking this off with one video while I wait on the few parts I ordered to arrive. The control handle. Was a great puzzle. To attach the handle bar one screw goes under the switch shaft. The handle seems to be high quality, of course I don't have it attached yet. So it will be a bit before...

I am posting this here so you can get a good look at the parts included in the kit. I briefly had a 020 topper. The video is clear enough on a good desktop for you to see the parts real well. I was unsure of the quality of the copy's handle because I have never handled a bare one. My 192t gave...

I am trying to diagnose why the intake boot on my 90% Farmertec MS200T melted. My Initial though was that the AM boot is not to spec, but now I am wondering if the tight fit between the piston and cylinder is causing excessive heat. As I was disassembling the cylinder to delete the base gasket...

I've been searching for the answer to this but to no avail, so here it goes. Just finished building an ms361 with the big bore kit, mostly just for fun. I know these are not the best thing out there so please don't just tell me huztl is crap, I am aware.... Got it started and turned it until...

Just browsing on Huztl's website and noticed the assembled MS660 and 372 clones (G660 and G372) both indicate a fuel-oil ratio of 25:1. Leads me to wonder why the big difference between Stihl & Husqvarna calling for 50:1 and Huztl using AM parts calling for 25:1. The Huztl saws are assembled...

Its been a year since we started building these kit and we have come along way and FarmerTec have made significant improvements. So newcomers don't have to wade though 160 pages. Lets start from scratch. I will put a link in both to the other so if there is something that need to be found, it...

Guys, if you been wanting a new small saw they just released this kit for 55$. Hard to believe! Shipping to me on the east coast of the US is $62.89. $118 even. So you get to have a little fun. Thats two kits in a month...

I have been wanting a pole saw and a dedicated bush cutter so I got this to use one way or the other. I got it unsure of the handle mount since the huztl.net website does not show that aspect. So I decided I would sort all that out once I got it in my hands on it. It is a very well made 2 cycle...

I found this color that is an exact match for the orange. I ordered it of course with hope and after it arrived at the dealer/ace we took it to the stihl dept and it is an exact color match. It looks to be a dual coat for plastic. The almost grays did not get it for me, this stihl gray was shown...

Just look at that clutch http://www.huztl.net/Free-Shipping-105-7cc-Holzfforma-Chainsaw-Power-Head-Parts-Compatible-With-STIHL-070-Chain-Saw-p435087.html I am going to go ahead and start this thread. The kits are expected to be ready no later than 1st part of May and then a little...