husqarna

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. F

    Husqvarna 162 Flywheel issues.

    I’ve gotten my hands on a Husqvarna 162 chainsaw, and when I try to pull start it, the cylinder won’t go all the way to the top dead center. I thought it might be a compression problem, but I have found that the fly wheel spins while the crankshaft doesn’t as long as the spark plug is in. I took...
  2. jordan henson

    272 impulse hole... Am I dumb or?

    So am I being really dumb? Because this 272 cylinder the impulse doesn't seem to go through? I feel like the only reason that line would be there is if it actually went through right ?? I got this saw not running, I had it running but it would lean out, could this be why... I don't believe the...
  3. Mafun464

    272xp chainbrake issues

    Call me dumb but i for the life of me cant figure why my chainbrake keep engaging. Av mounts are new all oem. It is flag style brake. I am missing something.
  4. quattro.pilot

    Sold Husqvarna 242XPG 1996 m.y.

    1996 Husky 242xpg for sale. Everybody knows what these saws are so I'll let the images speak for themselves.... 15,500RPM 10.3'ishLBS and 3.1HP are the highlights. Not quite pristine but I cleaned her up as best I could and I feel it shows well enough to display in your collection, or, in turn...
  5. Paul Silvestri

    Want to Buy WTB 272xp top cover

    Looking for a good to great condition 272xp top cover. Thanks!
  6. Paul Silvestri

    Want to Sell BARS!!!!!

    I have a few bars that I don't need that are too nice to be hanging in my shop. Prices include FedEx shipping!!! More pics available. 1. Makita LM husky 24" 3/8 050 $40 2. Oregon Powercut 24" D009 3/8 058 $60 (with chain) 3. Oregon Powermatch 20" D009 3/8 050 $55 4. Stihl Rollmatic ES 20"...
  7. Paul Silvestri

    372xp question

    Will the non x-torq top covers fit on a x-torq model? or is there a clearance issue?
  8. T

    365 Special Project

    Picked up this 365 Special quite a while back that had a crank seal leak and just finally got to it last night. Excited to fire it up and get it in some wood soon! If it ever dies I do plan on throwing the 372 top end on it but until then what should i do with this thing? Already has a muffler...
  9. Tree Feller

    Husky 390xp

    Well I went and done it! I bit the bullet a bought a 390xp with a full wrap handle!! Should be here next week!! Can anyone tell me the history of these saws? I have heard they are like an updated 288xp which I love. Anything I need to know about them?? thanks.
  10. T

    543xp

    Need help if possible! I have a Husqvarna 543xp with less than 20 tanks through it that completely bogs down when make a cut but idles and revs completely as it should with no issues. It has a new carb, plug, fuel lines and filters around. Comps at 115psi. No leaks on vacuum test. Aside from...
  11. sawpartsplus

    Sold Husqvarna 3120 Piston And KS Cylinder OEM

    I have a Cylider and Piston from a Husqvarna 3120xp chainsaw, 60mm , Kolbenschmidt cylinder, in good condition, no scoring or transfer, piston it in good condition as well, Both are OEM, it looks like the muffler bolt threads have been repaired , please view all photos, will ship anywhere in...
  12. Paul Silvestri

    562xp vs 620p

    Does anyone have any extensive handling of both these saws and if so tell me your thoughts on each and why you may like one over another or pros vs cons. I know the weight between them is different for sure. My apologies if this has been covered before but I couldn't find much on them being...
  13. C

    Carb primer bulb air lock/pressure building

    Hi, I've just tried to give my Husqvarna carb a spruce up, but when I try and prime the saw there is pressure building in the 3 fuel pipes, and no fuel circulating. Also have huge pressure in the tank too. Any ideas?
  14. D

    iron horse

    hello everyone, I need a iron horse rubber tracked skidder. Does anybody have one for sale or know of one for sale ? please let me know ,thanks Andy
  15. P

    288XP Blew Up - Help!

    Hey guys, I'm new to this. My brother - certified arborist, had a 288XP sitting around for too long (wanting to upgrade to a 395) and gave it to me to help clear a lot for a new shop I'm building. I had the thing running for about 20 minutes and it blew up. It needs alot of work. I imagine I'm...
  16. JohnnyChainsaws

    Sold NEW 455 Ranchers with 20" bar and chain with Warranty

    Currently overstocked new Husqvarna 455 Ranchers with 20" bar and chain. List is $449.95. Selling for $375 plus shipping. Send zip code for shipping quote. No state sales tax charged for out of state purchases. 5.3% charged in VA only. Husqvarna dealer located in Ashland, VA. 804-798-5887...
  17. Aaron Rybicki

    Why do you choose McCulloch?

    What draws people to McCulloch saws? I've ran Homelite, Poulan, Stihl, Lombard (Knock Off), etc, and so on, but nothing matches the experience that McCulloch gives. For me, especially, it's the 10-10 series. With the double louvered muffler.... It is louder than all hell. I love it. I can...
  18. Pakai Boti

    Walbro WA9 on Xenoah G35AV

    Hello.I got a Xenoah chainsaw from a friend, but i don't know where the H needle from the carb is.It is a walbro wa9 carb, I searched on google but no results... any ideas where can i get a whole carb or just the needle?Can you give me more info about this saw?
  19. C

    Husqvarna 350 wont start after chain popped off bar?

    I have a husqvarna 350, it's an older saw but it still ran great up until last week. I was cutting some tree limbs at work and the chain popped off the bar. So I put the chain back on just like every other time it had popped off and adjusted the chain tension. When I tried to start it, it...
  20. Jake Field

    Husqvarna 439

    Looked on Husqvarna's website a few minuets ago, and saw a 439? Anyone have one yet?
Back
Top