kiln

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. I

    Home-Built Wood Drying Kiln Questions

    Hi there, I've built my own 4' x 4' x 12' wood drying kiln with fire resistant plywood, rockwool, and plastic wrap around the outside of the kiln. I use a small 70pint dehumidifier paired with a box fan when I put freshly milled wood in to draw out as much moisture as I can for about a week. My...
  2. Stonewoodiron

    Dehumidification kiln sensor and controller

    Greetings! I am building a small the dehumidification kiln In my basement. It will be around 90 ft.³ looks like there’s a few choices for sensors and controllers regarding temperature and humidity. I’d like to get some thing that can be controlled from my phone so I can chart and monitor the...
  3. woodchuckcanuck

    kiln drying firewood

    Finished a 2 cord batch of hardwood in the kiln this morning. Load and go. Had to keep 6ft from the wife so she had to load herself :) Then we loaded another two cord in the kiln. 1.75 cords (7 of the 8 crates) were air drying for a couple weeks out in the field. The 8th crate was fresh...
  4. Johnnybar

    Heat Cycle for Slabs - Only Option?

    Are most of you fellas using a heat cycle on the lumber and slabs before the projects begin or are there other options these days? I saw one guy use a salt/boric acid mixture rolled on the wet slabs but, I'm not sure if that replaces the heat cycle.
  5. M

    Cheap kiln

    I got sick of waiting for slabs to dry out in my basement so I built a really simple kiln. The floor is green treated lumber 16" on center using a 3/4" subfloor plywood. The sides and the top are framed using 2x4s ripped in half as well as 1" thick foam board. Sides and back are just...
Back
Top