ms362

Hi! Just looking to see if anyone can double check my brain capacity in reading IPLs... I'm looking to order a crankshaft for a 362C with serial # 189xxxxxx. Which one of these two should I order (#37 is just #38 plus a screw or something). I am just hesitant because it seems like I'm mostly...

Just seeing if anyone has a (2015 DOM) piston and cylinder kit for MS 362. I would take a new or used in good condition if anybody has one please let me know. Thanks a lot guys!!!

First off, thank you all so much for the information and support you all provide in this forum. I have lurked for a long time and learned a ton. I have two Stihl 362C-M models: -First saw I purchased new in October 2017. It has the original Bosch R10 WSR6F spark plug. -The other saw I...

Hello, I'm seeking some help diagnosing my ms362c. It generally runs ok at full throttle, although recently it has had some moments where power dipped, and one instance where a puff of black smoke shot out the exhaust. The most annoying symptom would be that it doesn't idle well when it's warm...

I currently own a ms 291 and looking to upgrade to a Pro saw. I have been looking at the ms362. I know the ms 291 is 55cc while the 362 is 59cc... Is there a noticeable difference in power or should wait and go bigger into the 70cc range? thanks

Recently cleaned up a Stihl ms362 that the previous owner was throwing out. They said it didn’t run right. They turned all the carb adjustment screws randomly and I can’t seem to get the chainsaw to run. It’s getting spark, fuel and air, but I’m guessing the idle jet , high speed jet and the...

Seems the 391 gets the cold shoulder a lot since it’s just a home owner saw. But I did a muffler mod, my way and did not like it, so I was looking for a replacement. Found one one ebay for about $45, nah.... So I started to dig through IPL’s on the 311 and 362 but I stopped short and thought I...

I am looking to buy another saw. I am looking for a MS261, MS271, MS291, MS311, MS362, Or MS391.

Well I pulled the trigger on my first Stihl, a MS362-CM. Just wanted to give a nod to everyone who posts here. There is a real wealth of information (too much at times) to help a novice like me. After doing some research I wanted to pickup an extra bar (Tsumura light 24") and run it with a...

Hello everyone! My name is Matt. I live in Florida and I'm with South Walton Fire, which is close to where Hurricane Michael just came through. We have a lot downed trees throughout the neighboring counties and a lot of them are 75+ year old pines. We send crews over daily to help with the clean...

Long story short, I'm tired of my heavy 19 lbs. 60cc McCulloch and I've been shopping for a used(new to me) more lightweight "all around" saw for about two weeks. For once my wife says, "just hurry up and get one". Well I've narrowed down my choices to the following list of acceptable saws in...

I am looking for a NEW OEM replacement carb for my MS362. Rebuilding it is not an issue. I can do it in my sleep but before doing it I wanted to see if someone had a new one lying around or could get one at a good price. The part number for the carb is 1140 120 0600.

So I have the part #'s for the stock inner and outer felling dawg upgrades from Stihl for those 2 saws. Luckily they are the same part #'s. # 1135 664 0501 and # 1135 664 0500. I would like to stay stock for these to saws. Going much bigger would suck up too much bar on a 20" My local Stihl...

Hello, I just got a 362c Stihl chainsaw with a 20" bar in a "fix r up" state for a cheap price. The ignition module does need to be replaced. Now, I know the offical part number is 1140 400 1302, but what I am wondering is if anyone knows (for a fact) if another non-oem / aftermarket ignition...