pioneer

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    I.E.L. RA chainsaw compression

    HI everyone I have been working on a 1957 IEL Ra chainsaw. i just ran a compression test and got about 32 psi after 3-4 pulls. before i start buying parts i wanted to know what my compression should be for a chainsaw like this. also looking for a piston and rings for this saw and wondering if a...
  2. lincolnscott7

    Want to Buy Pioneer P52 Phelon coil needed

    Hello good folks! I just got a Pioneer P52 chainsaw that was quoted to be running just two weeks ago and now it has no spark. I have tried everything known to try and still get nothing out of it. I am currently baking the coil but I would like to find a spare even if I can get this one...
  3. bellarmine

    Hello from Nanuk of the North with Mr Farmsaw

    Hello All, I've just joined the ArboristSite to help out a friend with his Poulan saw. I've grown up mechanically inclined and good with electrical / electronic, like my Dad, enjoy tinkering with anything and everyhing. We also cut firewood for yearly heating using our (vintage?) Pioneer...
  4. G

    Pioneer 600a question

    Would anyone know of an updates clutch and sprocket I could use on this Pioneer 600a? The clutch shoes are worn out. Thanks
  5. Etinarcadiaego

    Help the ignorant: engine differences between Pioneer p39-p42-farmsaw I & II-pp405 etc-ad infinitum

    Hello all! A pleasure to finally get an account here. I tell you, this lovely site and acresinternet have been saving my dad and I saw mechanical woes since the 2000s. Lately, a massive thanks to pioneerguy600 and droppedp51 in particular as I have gone down the pioneer rabbithole and have...
  6. C

    Pioneer 2270 Fuel Supply issues

    Good morning folks! I have a Pioneer 2270 that I've been trying to get going but the recurring gremlin is the fuel supply issues. The problem ultimately is that the fuel is not being drawn completely into the carburetor and there are air pockets in the fuel lines that seem to be added by the...
  7. 50 Yr Old Vintage Pioneer Chainsaw Rebuild | Tool Restoration

    50 Yr Old Vintage Pioneer Chainsaw Rebuild | Tool Restoration

    Old chainsaw restoration or rebuilds have always fascinated me. I decided to buy this 50-year-old vintage Pioneer 2073 saw and see if I could refurbish it an...
  8. C

    PP455 / P45 low compression concerns

    I recently bought two saws with the same powerhead, one is a Poulan Pro 455 chainsaw and the other is a Target concrete saw, both essentially Pioneer P45 powerheads. They both have a feeling of low compression when pulled over without using the decompression valves. Now, they’re 72cc, and I have...
  9. C

    PP455 / P45 compression concerns

    I recently bought two saws with the same powerhead, one is a Poulan Pro 455 chainsaw and the other is a Target concrete saw, both essentially Pioneer P45 powerheads. They both have a feeling of low compression when pulled over without using the decompression valves. Now, they’re 72cc, and I have...
  10. GusGus2020

    Sold Pioneer P41

    Looking to sell a P41 - has good spark, rebuilt carb, full-wrap handlebar, light scoring at the top edge of the piston (exhaust side), ring in good shape. Runs, but carb needs some fine-tuning. Air filter cover in great shape. Let me know if you need more pictures. May be interested in trading...
  11. M

    New old stock Pioneer 3071 bar

    Hi everyone, just wondering if anyone has a list of the various part numbers for the original bars that fit a Pioneer 3071. I'm in the midst of a restoration and looking for a 18" bar with the original logo on it. Ideally new/old stock as the saw is for display. Thanks.
  12. M

    Pioneer bar numbers

    Hi everyone, I have an old Pioneer 3071 I am in the midst of restoring. Occasionally I see new/old stock ads come up on ebay with what look like never used bars with the old original Pioneer word/logo. Does anyone have a list of the original Pioneer bar part numbers that will fit the 3071...
  13. H

    Pioneer P21 flywheel nut

    Hi friends, I am in the process of bringing an old P21 back to life. The threads on the flywheel nut are stripped away so it will need replacing. Anyone out there familiar with a part that will fit correctly? Nut size and thread pattern perhaps.. Any help greatly appreciated. Cheers!
  14. R

    Want to Sell Pulan Vibe 3400 & Pioneer 1073

    Looking to sell Poulan Vibe 3400 and Pioneer 1073 Vibe runs good, New plug, fuel lines, sharpened, but tossed a chuck from the pulley. Pioneer has spark and good compression, fires but needs carb cleaned. PICKUP ONLY or meet and greet within 25 miles, If you are local to the Laurel Delaware...
  15. Woodslasher

    Sold Vintage Homelite, Pioneer, and Monkey Wards chainsaws

    Up for sale are some of my extra chainsaws. I have a Pioneer Farmlite that has no spark for $100, and a Pioneer 550 for $50. All the saws are $50 each unless otherwise noted. There are 2 montgomery wards saws. The montgomery wards are $100 plus shipping. I also have various Homelite parts. I...
  16. Aaron Rybicki

    Any Saw Collectors up Michigan way?

    Just wondering if there are any chainsaw collectors around my neck of the woods. I'm up in Manistee County, MI. I'm starting a collection myself. Mostly 70s Macs. I can't be the only one around here with the Yellow Fever. But if you collect any type and live nearby, gimmie a shout.
  17. M

    Pioneer P45 Poulan Pro 455 Cylinder help needed

    I recently got a PP455 with a bad Piston and Cylinder. I have found a Cylinder that says its part number 5074766801 . The online vender has it listed to fit a pp405 or a pp455 witch can't be possible. since they are different bore diameters. I have asked the vender to measure the bore diameter...
  18. Matt Thompson

    Dad's P20 needs a modern upgrade

    Hey folks, I'm new here. How y'all doon', friends? Dad gave me his oil Pioneer P20 and granddad's 1072 Holiday II. The latter needs a primer bulb but the P20 has been cutting okay for firewood and old snags. I'd like to cut a bit better without modding the motor. So I'm thinking about getting...
  19. Y

    old 60s-70s chainsaw questions

    Hi i just joined this great site, allready learned a fair bit from it over the past couple days. Not sure if im posting in the right catigory so let me know. I just got a couple old school saws off craigslist 80$. From what i can gather thier both great reliable saws and im excide to get...
  20. Kensie1988

    Sold Pioneer 650

    I would like to sell my Pioneer 650. It has the original bar and chain. I tried to get it running but couldnt. I dont think the sediment bowl was sealing well enough and pulling enough fuel. I dont know if it will even run anymore. The FM starter has been removed since I bought it and I no...
Back
Top