plug

First off, thank you all so much for the information and support you all provide in this forum. I have lurked for a long time and learned a ton. I have two Stihl 362C-M models: -First saw I purchased new in October 2017. It has the original Bosch R10 WSR6F spark plug. -The other saw I...

Today I was pressure testing a Husy 350 that I am in the process of rebuilding. I had an air leak around the spark plug that I was unable to stop without the use of an o-ring. My question is, is it normal not to be able to achieve an air tight seal simply by tightening the plug? This is only my...

What's the best Trailer plug to use for your chippers, stumpers, chip trucks, bucket trucks, wood splitters? I use the 7 Pole Round connection and find that it is always getting corroded. Does anyone ever get the same problem?

Hi all at AS, I am repairing 2x064 spark plug holes. I can only get 1 aluminium keen sert.The other option is stainless steel or steel. I believe the stainless has poor heat transfer,so I think the steel one would be better. Are the time serts you guys use steel? Thanks in advance,Chris.

I don't own either of these types of saws but I was curious as to how the plugs look on these saws since they are supposed to be running on the verge of too lean. Pics would be great if anybody has some.

Ok so I'm new to working on my own equipment and new to engines in general. But my 630 is having an issue with starting. Now here's where I gets complicated. It ran before the holidays and I was working on tuning it. So I had t sitting with a screwdriver in the high and low jets port and my...