splitter

I got this DR 28T Log Splitter last year, and have run about 2-3 cords through it. Yesterday, the ram suddently stopped, mid-stroke, after 1 hour of continuous use. Engine is fine, fluid is fine, no leaks. I learned about the coupler online at work just now, and had my wife send me these pics...

Okay, so I have access to some parts that would build possible the biggest splitter I’ve seen. At work I can get really heavy h beams (14x89s or 14x117s are common) and I have a few junk vehicles with running engines sitting around. At an auction house nearby they have an 8”x42” cylinder that...

Today I ( rented ) an Iron & Oak 24-ton splitter and made a 1/2 cord of wood with it. I put some pictures and videos below:

I want to know what your opinions are on splitters and processors and what you want to use. Personally, I use a Stihl Pro Splitting Maul and an MS 261 C-M because I can't afford the equipment I want. My dream setup for splitters is either one of these Eastonmades: The ULTRA...

I've split about a dozen cord with my new-to-me 27-ton Troy-Bilt splitter and never had the least problem, until yesterday, when the ram just stopped moving entirely. I had just just gone through a very large and green round of cherry and flipped the lever to return the ram, but it didn't do...

Just as the title states, Skid steer splitter, forward mounted. Fixed wedge or cylinder mounted? The conundrum ........Fixed wedge easier to build, although when using it as anything but a splitter (think giant pruner or such) it would try to pull towards the wedge or the material would be...

Selling my 2018 Log splitter. It has 103 hours on it and works great. $18,000 or best offer. I am located in Brantford, Ontario. Send me a message here if you are interested or call me on my cell phone at 519-802-5887. Thanks for looking.

I have a Prince Auto cycle valve I would like to sell. I've been parting out my splitter project and this is one of the only items left. This unit has all 3/4"NPT female ports. This unit has never been used. Bought new from Surplus center a few years back. I'm located in NE Georgia and I'm...

Good afternoon, I am in North Carolina and have a central boiler OWB which heats my house and three-car garage. By the time this winter is over, I will have burned approximately four tri-axle dump truck loads of logs which I estimate to be around 15 cord. This spring I would like to upgrade to...

Hello new here i Have a Brave it says Big Brave on Cylinder i traded for and i am having some problems i hope some one will know where to steer me when you frist start splitting it dose ok but after about 10 minutes it will stops splitting wood 16 -18 inches in diameter it will go up to log and...

Hi All, I'm new to this group. I wanted to know if anyone had a suggestion or ever had this issue before. Log splitter 9hp BS motor, 25ton Hydraulic Cylinder on the machine(The brand isn't known). As we were using it the oil started gushing from the piston area close to the cylinder. We...

Hello, New to the site so I hope this is the right place for this question. And I apologize for the length. I've been heating with wood for a while but am somewhat new to owning a wood splitter.. I've rented before when I had a large quantity and finally bought a used MTD 21-ton splitter this...

I'm new to splitting wood. Grew up and lived for nearly 40 years 'in the city'. Now we're in a rural area up a 2 mile mountain road with more frequent power outages than I'd like, and no neighbors in sight. Our 4th winter heating with wood. First 2 winters, we bought pre-cut wood. Last...

Anyone have any experience with the new generation of TSC’s CountyLine splitters, specifically the 30 ton model? The prior generation was made by SpeeCo, but the new ones are different. I’m hoping I can snag one of these soon, if the price is right...

I have an MTD 24BF550B029 log splitter which seems to be a very common and frequently relabeled model. The cylinder goes up and down. But, it refuses to split and it doesn't seem to strain the motor. I replaced the pump seals which didn't fix it. Then, I rigged a pressure gauge on cylinder line...

I am betting that there are still some of these Green Machines out there so if you could share the filter part number that fits it would help me. The one that was on this tool did not have anything legible on it and the parts store match for it only spins 1.25 turns (vs 3.25 turns) so thread is...

Hey guys first post here, found you guys while googling issues with my stepfathers log splitter, got lots of results but no definitive answer to the problem i'm having. It's a 2012 Troybilt L27 log splitter with a honda GCV160 motor. The motor runs great, starts up first pull, runs strong...

First of all I need to introduce myself. I'm a project manager for a medium sized industrial construction firm in Houston where I live. My interest here is purely for myself and family plus some Christmas money each year. I currently have a tractor supply model 15 ton vertical splitter. I...

22 Ton Forest King splitter. Had it for years and it has worked great. A cast "collar" split and I've searched the internet trying to find a replacement. It basically sits between the control handle and the hydraulic control valve and provides leverage so you can operate the handle. I've found...

35633564356535663567I have a 2009 Timberwolf tw5, has 4-way wedge, table grate, Log lift and auto cycle. Also a 2013 Timberwolf 24 ft. conveyor. Both units are in excellent condition and I have manuals for both. $12,000 for both. Email me at [email protected]