011 color differences...

[beelsr]

white case or orange case. what's the diff?

 

[Lakeside53]

Orange - Real old - and bad reed blocks that are NLA.
white -not quite as old, but old.

 

[beelsr]

OK, thanks...

So, what do you do if you have a bad reed block on an orange one? Throw one from a white one on? No tech bulletins here....

 

[Lakeside53]

Won't fit...

You can try turning the reed over (screw holds it in, which is part of the problem), and using Hylomar HPF on all the gaskets.

 

[jcsaws]

red or white

hi, why did you need to know? we only had red 011. but when the went white only had 009,010,012. which mainly changed handles piston/cyl sizes.
but red to white changed, 4 bolt to hold cyl, clyinder spacer to reduce heat getting back to c/case. plus a heap more stuff. :computer2: :greenchainsaw:

 

[beelsr]

Won't fit...

Didn't think so....

You can try turning the reed over (screw holds it in, which is part of the problem), and using Hylomar HPF on all the gaskets.

OK, I'll try to remember that if I ever need to...

 

[Cut4fun]

So, what do you do if you have a bad reed block on an orange one? Throw one from a white one on? No tech bulletins here....

I fixed up a 011 last year for a winter project and just letting you know I ended up with a extra reed block from the old orange 011's. Good runners and well built, but shy on power for a 41cc saw. So I sold the 011 after comparing it to other small saws.

 

[beelsr]

I fixed up a 011 last year for a winter project and just letting you know I ended up with a extra reed block from the old orange 011's. Good runners and well built, but shy on power for a 41cc saw. So I sold the 011 after comparing it to other small saws.

thanks for letting me know.

I have a white one that runs a treat now and a box with 3 orange ones but I still need to dump them all in the parts washer for about a week. Pretty grungy they are...