Sold 044/ms440 12mm clutch side crankcase

[morbius18]

I'm looking for a clutch side crankcase half for a ms440 or a 12mm 044. I bought a 'good working' used unit off ebay, and the insert on the clutch side has separated from the mag case.

 

[GeorgiaVol]

I probably have 1. I think it was flywheel sides I do not have. I can check tomorrow evening.

 

[morbius18]

That would be great, thank you

 

[drf255]

Gotta be careful with Stihl cases. They generally have to be a “set”. The jug mount pad is machined with the sides mated, so often a mismatch will result in an uneven/unusable situation.

Just a word of caution.

 

[morbius18]

Gotta be careful with Stihl cases. They generally have to be a “set”. The jug mount pad is machined with the sides mated, so often a mismatch will result in an uneven/unusable situation.

Just a word of caution.

Thanks for the warning. I try to match sets, but if it has to be milled to match, I'm willing. Right now it has a chinese/farmertec crankcase...

 

[brandonstc6]

Wanna trade? If the huztl case is in good shape.

Sent from my iPhone using Tapatalk

 

[brandonstc6]

Or I’ll sell it


Sent from my iPhone using Tapatalk

 

[morbius18]

Bought