070 Starter Parts

[jensen 32000]

Good News! I finally got that Stihl Lightning from Germany today and an original manual, from another Ebay purchase. Overall looks pretty good and clean, carb looks rebuilt, etc. The bad news: The starter feels beat. it barely grips by the time the cord is 3/4 of the way out. The starter cup teeth are very smooth, and the two tangs on the rope pulley, that the pawls hit are cut through about 1/16 of an inch. This is the two piece starter cover. Any leads for parts? Also I could use a top plate, as this one is missing the logos etc. Thanks in advance Mike. (It was supposed to run like his Porshe Speedster, but I can't get it to start)

 

[JimL]

Stihl dealer
part#'s
1106 190 4600 is the pawl assembly
1106 190 2100 is the recoil cup assembly

Both are good numbers and when ordered will take a while to get I would imagine, no more than 2 weeks. I dbout any supply houses carry them..

 

[Lawn Masters]

IF you are quite patient, watch on ebay, ask some sellers if they have one, you might just get lucky and find one.

 

[Jacob J.]

If you don't find anything right away, I have a big box of 090 parts I can root through to find you those items.

 

[jensen 32000]

Thanks all for your advice guys. Jacob: It is a Red Lightning actually, this starter has a center piece held on with four screws. Would that use the same internal as the typical 070/090 one piece starter cover? Also Any leads for the top aluminum plate with the Stihl/ Lightning logos? Mike

 

[Jacob J.]

Hey Mike-

JimL would be your contact for red lightning parts, I wouldn't have anything to fit a red lightning. He did have some of those new aluminum top plates, he might let loose of one.

 

[JimL]

no more top plates


the recoil innards are the same as a 090. parts are still made today..

 

[jensen 32000]

top Plate

Jim you have the part # for the plate that you got and I'll try to see if I can find one. Also I'll post some pics when I get my computer totally running again. Thank Mike

 

[JimL]

1106 650 5300 Lightning plate complete

 

[cbfarmall]

That pawl part# is the guts for an older 045/056 starter as well. Just picked one up today for $10.60, plus the rest of the washers that complete the stack.

Should be pretty easy to get. Don't know about that other part#.

Chris B.