Ray Bennett
ArboristSite Guru
I took my 2071 out for some work today and the good news is it ran great. My question is where is the carb supposed to be set on this saw. When I got it The H screw was just about 3/4 turn out from lightly seated. The L was around 1/4 turn out. It ran strong has lots of compression but that scared me so I went to 1 turn out and that caused it to burbble a little much. I slowly worked the H back till It was just over 3/4 turn out like when I got it. I did a search here and most folks are saying to put the 372,371,2071,and 2171 at 1 turn out for H and L. The saw will not seems perfect at just over 1/4 L and just over 3/4 H. Do I have some type of problem? The plug and air filter are in good condition, Im running a 24 inch B/c