Sold 2100cd project

[fin460]

I took a 2100cd in on trade this summer, with good top end and missing a few parts.

as far as I know it was only missing handlebar and kill switch. The saw was cleaned up nice ready for finishing by previous member.

Fuel lines are soft around carb, I was able to pull one in two.

I did pick up a full wrap handle bar for it by another member here, but I'm not sure if it fits quire right, bolt holes are correct, but doesn't just snap in, I'm missing the two screws that go into the bottom to hold the handle bar on, bolt patter looks correct though, it just seems like there may need to be a bushing or something to make things fit tight.

Photos to follow, but I have no experience with this model, I will need some help to make this an informed ad.

I open to offers at this point, but I'm expecting 250$ plus shipping, If you want to pay more let me know, but that is where I'm at.

This ad is open for conversation, I would like to learn a little about this saw, I need some help.

 

[fin460]

 

[fin460]

 

[fin460]

I have some photos of how the handle bar fits on my phone, I'll post them up sometime later.

 

[Braintree]

Justin, P.M sent

 

[fin460]

Sold pending funds

 

[Jon1212]

I have some photos of how the handle bar fits on my phone, I'll post them up sometime later.

You put a full wrap on your phone. That's Bad A**, but it's not going to fit in your pocket.

 

[Marshy]

Second dibs, PM sent.

 

[Marshy]

The Suspense is killing me.

 

[fin460]

Original deal fell through, not sure why, but it is back up for sale.

 

[fin460]

I thought I had this saw sold twice!,

Price is set at 285$ shipped.

 

[gulity1]

Do you have the "7th" mount I think whats husqy called it?? there is a plate and under the bar and between the tank that takes up the space kind of a goofy arrangmanent That is what I see that is missing for the handlebar fitment. I know those parts are out there on the bay if all else fails for a couple of bucks

 

[fin460]

I must be missing the 7th mount, the handle bar looks correct, but just seems to be missing a piece to make it fit correctly.

 

[Big_Wood]

the 2100 had a piece that mounted between the tank and handle on the bottom. could be what's confusing you. one side was rounded to the shape of the handle and the other side that sat flush with the tank was square.

 

[fin460]

Thanks for the help guys,

SPF