3/8lp/picco bar for ms260?

[thompsoncustom]

tired to use the search function but came up short on an answer. does anyone make a reasonable 3/8lp bar for the larger mount of the ms260?

if not I'm sure I could just cut up a low profile bar I have and make it work.

 

[cscltd]

Check with local Stihl dealer on “ms261 performance kit“
fits ms260 also. Includes 2- 3/8 low profile chains, matching bar and drive sprocket.

 

[Mad Professor]

3003 000 6313 not sure if you get a deal or a Stiheal buying the kit

 

[RedneckChainsawRepair]

Sets that were sold at stihl.

Can also just make your own too. Did that for a 12" one time on a 026 that was ported.

 

[link]

Sets that were sold at stihl.

Can also just make your own too. Did that for a 12" one time on a 026 that was ported.


View attachment 1005423View attachment 1005424

Ported 026 with a 12" 3/8L, yea baby that's an utility saw with a temper.

 

[RedneckChainsawRepair]

Ported 026 with a 12" 3/8L, yea baby that's an utility saw with a temper.

Using it during chain build off with 45DL picco chains we had years back. Just pine 8x8 cants for wood.

 

[Squareground3691]

tired to use the search function but came up short on an answer. does anyone make a reasonable 3/8lp bar for the larger mount of the ms260?

if not I'm sure I could just cut up a low profile bar I have and make it work.

Cannon maybe

 

[Mad Professor]

Cannon maybe

GB makes 3/8LP 3003 mount bars in all sorts of lengths; GB bars seem to be very high quality. They are had to find in USA though.

Before they got closed down, Left Coast Supplies had an awesome deal on those bars and Stihl 63PMX milling chain. This was 2018.

If I'd had known LCS were going to get shut down, I would have brought up a whole lot of them, and the PMX chains, for milling with my 066. I don't think shipping would have been much more with 3-4 bars and a dozen chains.

 

[Squareground3691]

Cannon rim sprocket set up 20” narrow kerf bar and stihl 3/8 LP picco RS chain MS 250

 

[Mad Professor]

Cannon rim sprocket set up 20” narrow kerf bar and stihl 3/8 LP picco RS chain MS 250

250 has a different bar mount than a 260. The 3003 mount is used on saws up to 066/056 size.

The rims on 250/260 probably switch out though.

 

[can]

Here is some numbers if you are interested.

stihl picco bar 13 inch 3003 000 6306
16 inch 3003 000 6313
18 inch 3003 000 6317

sprocket 7: 000 642 1240
sprocket 8: 000 642 1241


I dont know how many dl for 13 and 18 inch but I think it is 50 dl for 13 inch, for 16 inch it is 60.

I run a 16 inch bar and picco super chain on my stihl 261, very happy with that.

 

[thompsoncustom]

sprocket 8: 000 642 1241

they don't make this anymore do they?

Here is some numbers if you are interested.

stihl picco bar 13 inch 3003 000 6306
16 inch 3003 000 6313
18 inch 3003 000 6317

sprocket 7: 000 642 1240
sprocket 8: 000 642 1241


I dont know how many dl for 13 and 18 inch but I think it is 50 dl for 13 inch, for 16 inch it is 60.

I run a 16 inch bar and picco super chain on my stihl 261, very happy with that.

 

[Mad Professor]

Here is some numbers if you are interested.

stihl picco bar 13 inch 3003 000 6306
16 inch 3003 000 6313
18 inch 3003 000 6317

sprocket 7: 000 642 1240
sprocket 8: 000 642 1241


I dont know how many dl for 13 and 18 inch but I think it is 50 dl for 13 inch, for 16 inch it is 60.

I run a 16 inch bar and picco super chain on my stihl 261, very happy with that.

Sthil don't let Americans play with 3003 mount picco bars anymore. Glad to see you can order them up North your way.

The GB bars are top notch, I'll get a picture ......

The/a 16" 3003 000 6313 bar came with my logosolmill/066 w/63PMX chains.

Logosol USA didn't know then, and shipped me an Oregon 3/8 24" bar that promptly FU my 24" 3/8 piccoPMX/LP chains. 3/8 picco/LP are not same as 3/8 stuff......