olgreenmachine3400
ArboristSite Lurker
Hey guys I need some help!! I'm looking for a 36"bar and a skip tooth full chisel chain to fit the Poulan 3400 to 6700serese saws. .050 3/8 and dont know number of drive links. My guess is 112DL. I have found 28" 30" and a 32" with very limited info and most NFS. I know there out there as have pictures and videos of them on these saws. Please dont scold me for wanting to do this. I know these saws arent high hp or rpm. I have a couple I have been playing with that really run good so far. Ported Base delete MM Timing advance Increased air flow. I want a long bar for cutting ice. Bucking firewood without bending over. I have a redoak blown down thats 4 1/2 ft around the trunk that i would like to slab off and see what it looks like in the center. The cross referance I have found is really poor too. I know there is other saws with the same bar
28" - 3/8 Pitch - .050 Gauge - 92 Drive Links
Style
PowerCut Pro Bar & Full Chisel Chain
Compatible Model
For Poulan / Poulan Pro 203, 245, 306, 306A, 360, 361, 375, 385, 395, 400, 446, 450, 3400, 3700, 3800, 3900, 4000, 4200, 4400, 4900, 5200, 5400, 5500, 6700
This Oregon AdvanceCut replacement 20" (50cm) guide bar and chain combination is designed to fit a variety of chainsaw models, and features a 70 drive link chain with 3/8-inch pitch and 0.050-inch gauge
Compatible with: CRAFTSMAN 358.35212, 358.35483, 358.35487, 358.35608, 358.35609 ECHO CS-451, CS-452, CS-500EVL, CS-501EVL, CS-590, CS-60, CS500, CST-610 JOHN DEERE 50AV, 50V, 51SV, 55SV, 55V, 60V, 65, 66SV, 70V, 80EV MCCULLOCH 10-10A, CP 70L, CP55, CP70, Double Eagle 50, Eager Beaver 3.4, MAC 1-10, Mac 3-10, Pro Mac 805, Silver Eagle 3420, Silver Eagle 3720, Super Pro 60, Super Pro 70, Timber Bear, Titan 50, Titan 57 POULAN 203, 245, 306, 3400, 360, 361, 3700, 375, 3800, 3900, 395 SKIL 1641
28" - 3/8 Pitch - .050 Gauge - 92 Drive Links
Style
PowerCut Pro Bar & Full Chisel Chain
Compatible Model
For Poulan / Poulan Pro 203, 245, 306, 306A, 360, 361, 375, 385, 395, 400, 446, 450, 3400, 3700, 3800, 3900, 4000, 4200, 4400, 4900, 5200, 5400, 5500, 6700
This Oregon AdvanceCut replacement 20" (50cm) guide bar and chain combination is designed to fit a variety of chainsaw models, and features a 70 drive link chain with 3/8-inch pitch and 0.050-inch gauge
Compatible with: CRAFTSMAN 358.35212, 358.35483, 358.35487, 358.35608, 358.35609 ECHO CS-451, CS-452, CS-500EVL, CS-501EVL, CS-590, CS-60, CS500, CST-610 JOHN DEERE 50AV, 50V, 51SV, 55SV, 55V, 60V, 65, 66SV, 70V, 80EV MCCULLOCH 10-10A, CP 70L, CP55, CP70, Double Eagle 50, Eager Beaver 3.4, MAC 1-10, Mac 3-10, Pro Mac 805, Silver Eagle 3420, Silver Eagle 3720, Super Pro 60, Super Pro 70, Timber Bear, Titan 50, Titan 57 POULAN 203, 245, 306, 3400, 360, 361, 3700, 375, 3800, 3900, 395 SKIL 1641
