372xp coil question

[benchcarver]

The coil went out on my Husqvarna 372xp. I really needed the saw and had a parts 350 laying around. Got the idea to just switch the coils out since they look almost identical. The saw fired right up and ran but I did notice a little blue smoke when it first started.
I do a lot of chainsaw carving. Cutting a lot with the grain and this saw is my main blocking saw. I depend on this saw and don't want to mess it up. Did I do wrong just changing the coil out....Any ideas? Thanks
:newbie:

 

[manual]

I could do a search for you at the husky web site and see if they are the same part numbers. what year are the saws ?

 

[benchcarver]

not sure of the year

I'll check when I get home. and post again. It seems to be working ok I just wondered if anybody thought it was a bad idea. Thanks

 

[SRT-Tech]

was the saw sitting for a few days before firing it up? the blue smoke might just be a bit of seperated mix oil....

 

[manual]

This looks like a Job for Sawtroll.

 

[troutfisher]

The part #'s are 537 16 21-04 for a 350,
and 537 16 22-04 for a 372XP.