rupedoggy Addicted to ArboristSite . AS Supporting Member. Joined Jun 13, 2001 Messages 5,148 Reaction score 5,071 Location Dayton Nevada. Apr 9, 2018 #1 Here is a good case (bad center bearing on crank). Dirty but OK top. A new back plastic under the carburetor piece. Good cylinder and two pistons that are used but one is usable and the other questionable. How's $60? Mike
Here is a good case (bad center bearing on crank). Dirty but OK top. A new back plastic under the carburetor piece. Good cylinder and two pistons that are used but one is usable and the other questionable. How's $60? Mike
logger450 ArboristSite Operative Joined Feb 20, 2013 Messages 151 Reaction score 89 Location upstate,ny Apr 9, 2018 #2 Is the bottom of the case where the oiler adjustment is broke out bigger than normal? It's hard to tell from the pic
Is the bottom of the case where the oiler adjustment is broke out bigger than normal? It's hard to tell from the pic
rupedoggy Addicted to ArboristSite . AS Supporting Member. Joined Jun 13, 2001 Messages 5,148 Reaction score 5,071 Location Dayton Nevada. Apr 9, 2018 #3 No I cleaned some of it off and there is factory paint all around the edge. Not rough or broken out. Anyway it is sold. Mike
No I cleaned some of it off and there is factory paint all around the edge. Not rough or broken out. Anyway it is sold. Mike