742 made in norway

[David Mayers]

Hopefully someone can help, I have a Chainsaw bar 3/8 058 1.5mm "742" made in norway I need to replace the exact bar can someone can help, not sure what the "742" means regards thanks David.

 

[Aknutter]

Hopefully someone can help, I have a Chainsaw bar 3/8 058 1.5mm "742" made in norway I need to replace the exact bar can someone can help, not sure what the "742" means regards thanks David.

Can you add a picture, count the links, size of bar, make and model of saw it's off of.

 

[David Mayers]

Can you add a picture, count the links, size of bar, make and model of saw it's off of.

Thanks for the message, it's a modified bar, on a different saw than the blade, herewith picture of bar, thanks regards David

 

[Aknutter]

You have a 18 inch bar
3/8
.058
58 dl
Possibly a sandvik, jonsered
Just need to know the mount size, which can be obtained by the make and model of the saw. Hopefully someone else can come along and help.

 

[David Mayers]

You have a 18 inch bar
3/8
.058
58 dl
Possibly a sandvik, jonsered
Just need to know the mount size, which can be obtained by the make and model of the saw. Hopefully someone else can come along and help.

Thanks for the reply ,the bar/chain is 68dl as I mentioned the bar has been modified from what it originally was to fit on a stihl 08s, but because the oiler lies up, I would like to get an identical new one and do the bar mount modification correctly, regards thanks David

 

[cscltd]

It was probably an Oregon d009 mount to fit 372xp husky and alike. but ground out to fit on 08 Stihl

 

[KASH]

David I have a Stihl 08s with a 16inch sprocket tip Oregon bar on it if you would like I can give you the numbers tomorrow

 

[David Mayers]

David I have a Stihl 08s with a 16inch sprocket tip Oregon bar on it if you would like I can give you the numbers tomorrow

Thanks Kash for the message that would be great regards thanks David.

 

[ChillyB]

My Husqvarna 350 bars are made in Norway. I’m not out in shop to look for markings.

 

[ChillyB]

 

[Dennisthemenace]

Or you could just buy a 3/8 21 inch stihl bar with the large mount and just bolt it straight on. P/N 3002 000 9125.
A decent 08s will pull that. I have a 17 inch 404, no probs at all

 

[David Mayers]

View attachment 982294

Thanks for the information my 08s already has the sprocket conversion which takes 058/1.5 3/8 68dl regards thanks David

 

[David Mayers]

3002 000 9125

Thanks for the information but the genuine bar is almost 3 times the cost of an equivalent , bit out of my price range, regards thanks David.

 

[KASH]

David the bar on my 08s is 16inch sprocket tip here is what it says on the bar.
Oregon
18272
1650 1151
3/8
I have saw grease often on sprocket tips but this one says grease hourly
Made in Canada
Kash