Added Another Couple to the Jonsered Pile.

[Bob Hedgecutter]

Found (a while ago) another complete (ish), running 2094 that was going cheap, grabbed it to supply parts for my good one as and if needed. Bit rough, been butchered in places- but starts and runs like a new saw.

Also found a suitable candidate to fill the void between 2137 and 2159. Not pristine, but 99% complete (if you do not count decals) and running 2152. The equivalent of an Orange 353.

 

[Bob Hedgecutter]

The 2094 has some interesting "additions" in the form of burn mark an the recoil cover and side of the saw.
Apparently these are from a panic falling of a burning Macrocarpa tree while it was on fire. Seems the panic took over and the lean was not judged, tree sat back on the back cut and jammed the bar. Owner had to go get a tractor and wire rope to pull the tree and free the saw.
I am guessing some embers fell on the recoil side while he was away.

Not sure who cut off the riser for the chain brake flag and ground it flat with the clutch cover! But it will be forever brakeless now unless I swap covers off the good one. Not like good 2094 covers show up weekly in for sales columns.