Can't get an ignition!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GhillieShooter

New Member
Joined
Mar 12, 2010
Messages
4
Reaction score
0
Location
Behind you!
Hi guys,
I recently purchased a 2009 husqvarna 235 x-torq and it ran well when i bought it. Since then it ran once by mistake without oil in the gas. The engine was turn off like after 2 min at throttle speed. 2 weeks later i realized the engine ran on clear gas and it would not start anymore. Someone told me that the saw would not start because the was not enough compressions. So i change the pistons rings to make sure. Even if the old one was nearly as new . No damage appear inside the engine block. Now Running in well mixed gasoline it would still not start. Try 2 new spark plugs and they all seems to have a good spark, air filter is clean too.

If you have any idea about what's wrong about my saw let me know! Ask question!

I need your help guys!
 
Back
Top