Patrick1903
ArboristSite Operative
2007 Altec DC1217
Located near Fredericksburg, VA
12” Diesel chipper for sale. This is a 2007 model that is similar to a Bandit or Hyroller. It does not have the electronic feed sensing system that stop and starts the feed wheel, so it’s a simpler system in that regard. (Edit - feed issue was due to rpm not being high enough). Feeds fine now.
Engine runs well. Perkins diesel. Starts every time in less than 1 second cranking. Idles very smoothly.
Hours unknown since hourmeter and tach were broken when I acquired chipper. Prior owner had engine replaced, so I believe this to be a low time motor. It has a new tach/hourmeter but it isn’t working correctly. I believe it to be a wiring or ground issue. Voltmeter shows it charging at 13 plus volts.
New battery and battery box.
Replaced hydraulic fluid and filter in August. New oil and filter in August.
Drive belt for cutter wheel replaced in October. Blades sharpened this summer, but will need new ones next time around.
Trailer lights need some work, mostly just new connectors and proper grounding. They work now though for trailering.
Cutter wheel bearings sounds good and cutter wheel rotates freely.
I do not have a title for it.
Cash deal to be done at my local bank.
$11,000.
Thanks for looking.
Patrick
Located near Fredericksburg, VA
12” Diesel chipper for sale. This is a 2007 model that is similar to a Bandit or Hyroller. It does not have the electronic feed sensing system that stop and starts the feed wheel, so it’s a simpler system in that regard. (Edit - feed issue was due to rpm not being high enough). Feeds fine now.
Engine runs well. Perkins diesel. Starts every time in less than 1 second cranking. Idles very smoothly.
Hours unknown since hourmeter and tach were broken when I acquired chipper. Prior owner had engine replaced, so I believe this to be a low time motor. It has a new tach/hourmeter but it isn’t working correctly. I believe it to be a wiring or ground issue. Voltmeter shows it charging at 13 plus volts.
New battery and battery box.
Replaced hydraulic fluid and filter in August. New oil and filter in August.
Drive belt for cutter wheel replaced in October. Blades sharpened this summer, but will need new ones next time around.
Trailer lights need some work, mostly just new connectors and proper grounding. They work now though for trailering.
Cutter wheel bearings sounds good and cutter wheel rotates freely.
I do not have a title for it.
Cash deal to be done at my local bank.
$11,000.
Thanks for looking.
Patrick
Attachments
-
3AAB4A87-099C-47F4-AF04-F199FCCAFF65.png978.4 KB
-
044C298F-3546-462F-BFF6-BA4EE85A2FD4.png909.9 KB
-
A9DDD416-64A9-49A5-A288-E38BC6EB133F.png1.7 MB
-
82E49F5D-FB6B-4464-8717-B1D2E1B0E5FC.png1.5 MB
-
69197A00-C623-4657-8796-C87B48C466A4.png1.5 MB
-
D7AF8F50-DDA5-4380-A191-74BA4A8F2939.png1.6 MB
-
1E331EBD-FD8D-4521-B82B-7671CE0B151D.png1 MB
-
9369488B-49BF-41F0-886A-20C488E2D475.png995.1 KB
-
3852180C-6D0A-48ED-AD0A-8F2D7644EAB7.png1.6 MB