Clinton Super D65

[Marine-piper]

Good afternoon group,
I'm hoping someone can tell me what color I can use to match the original paint.

Thanks,
Al D.

Homelite collector in training [emoji879]

 

[67L36Driver]

John Deere yellow is a touch darker but a passing fair match. [emoji106]

Look for Valspar tractor & Impliment paint. It’s the only one besides true engine paint from the auto parts store that stands a chance against gasoline. [emoji37]

 

[67L36Driver]

Is that the fuel pump?

If so the diaphragm is likely shot.

Look into using a Tilly HL converted to external impulse.

 

[Marine-piper]

That's the oil pumper! It has a Tillotson HL already. The impulse line comes from the bottom of the crank case to the carb.

Homelite collector in training [emoji879]

 

[Marine-piper]

Ok all you brilliant saw studs! I have the Clinton Super D65 and need help.
Can anyone tell me how many needles are on the piston to crank rod? I have 25 and the IPL doesn't state the amount just a "bearing".
Also is the crank just pressed in or held in w/ screws or clips?

Thanks.
Al D.

Homelite collector in training [emoji879]

 

[Marine-piper]

I found the answer to the bearings (25) but how about the crank, is it pressed in or held in w/ clips?

Homelite collector in training [emoji879]

 

[s sidewall]

I had one of those teeth shakers, heavy as lead. Had to loctite this gas/oil tank strap screws in to keep them from coming out every time I ran it. Check to see if McCulloch yellow is a close match on your paint.

Steve Sidwell