Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I have fitted the large mount Husqvarna bars to my CS-590 and 600P and everything looks OK except for the oil hole. I'm certain they will work with at most a slight modification to the oil hole. I'll look into it more when I wear out the bars they came with, as 70DL 20" chains are not nearly as common as 72DL's in these parts.As far as the clutch sprocket, for sure wear the one the CS-590 came with out first, then look at upgrading to the 600P/620 set-up. It's direct replacement from what I can tell in the IPL's, but only an advantage if you are really cutting a LOT of wood and wearing out sprockets in short order........Cliff
I have fitted the large mount Husqvarna bars to my CS-590 and 600P and everything looks OK except for the oil hole. I'm certain they will work with at most a slight modification to the oil hole. I'll look into it more when I wear out the bars they came with, as 70DL 20" chains are not nearly as common as 72DL's in these parts.
As far as the clutch sprocket, for sure wear the one the CS-590 came with out first, then look at upgrading to the 600P/620 set-up. It's direct replacement from what I can tell in the IPL's, but only an advantage if you are really cutting a LOT of wood and wearing out sprockets in short order........Cliff
