Cutter placement on a vermeer sc502

[gooseman]

just bought a vermeer sc502 and have a question. I called vermeer and have the manuals coming but won't be here till after the new yr, my question is I am not sure that the teeth are installed the correct way as in the orientation of the cutters. They are the original style from Vermeer. Does anybody have a diagram or pic of the set up for these I see that there are 3 repeating sets of 10 so 30 teeth all together. Thanks for any info

 

[Brian Holly]

Best image I could find. I have a diagram but wouldn't be able to send it to you until Monday.

 

[gooseman]

The way the teeth are now are the first set are one left one right the second set are both rights the third set are both lefts then one of each then two straights. Just doesn't seem correct to have the two sets with both being rights the the next lefts. Just want to be sure. Thanks

 

[Brian Holly]

Found the diagram.

 

[Brian Holly]

I was wondering if the diagram helped or was your machine setup the same as it shows.

 

[gooseman]

It helped. They were not setup this way. We just purchased it and I took off all the pockets and cleaned everything and sharpened the teeth replacing a few broken ones and never seized all the bolts real good. Thanks again for your help. Really appreciated