Want to Sell Dolmar 7910

[t4driller]

Dolmar 7910 that I ported. Runs strong and like the way it handles, just need to move a couple saws to make room for different projects. I used all oem parts except for a caber ring. Cylinder did not get machine work, just porting, opened muffler up, and timing advance. Numbers that are in it are
Ex 99
Trans 127/130
Intake 80.5
Squish is .020
I did sand squish band to get proper clearance without base gasket. It does have some scuffs and scratches from normal wear. Muffler has a small crack in front around the mounting hole but still functions good. Has limited coil in it but is advanced. Compression reads 160 on my gauge but I think my gauge is wonky. I tested my 350/346, 361, and 7910 and they all came up with exact same reading. ??? But it does pull over alot harder then my other saws. $425 and I'll split shipping , paypal friends and family. Need anymore pics or questions just ask. Thanks

 

[stevetheboatguy]

Good guy to deal with! Great price too!

Good luck with a quick sale Mike!

Steven

 

[t4driller]

Good guy to deal with! Great price too!

Good luck with a quick sale Mike!

Steven

Thank you.

 

[Woos31]

Nice work saw sir

 

[RiverRat2]

This shouldn't take long

 

[sawjunky23]

That seems like a very reasonable price for a ported 70cc class saw

 

[t4driller]

This shouldn't take long

How have you been. I still have that 440 sitting here tempting me to put fuel in it. I've come close a couple times. Thank you again for selling it to me.

 

[t4driller]

There's some videos on you tube of it running. My username is Mike toath. Also did a build thread on it. I really do like it, but I have an 066 red light and jonsereds 820 with heated handles that I wanna get to next. So I need to move a couple.

 

[RiverRat2]

How have you been. I still have that 440 sitting here tempting me to put fuel in it. I've come close a couple times. Thank you again for selling it to me.

Doing well Mike, other than the heat is a bit out of control,,, Headed up to the Finger lakes above Saratoga Springs in a few weeks for some much needed R&R,,, Can't wait!!!
GLWYS,,, I have a ported 7910,,, it is a beast of a work saw,,,

I here you on the 440, they are sweet machines for sure I run A Hybrid W/460 top end pretty regular w/20" setup. it will cut anything I need!!!!

 

[t4driller]

I couldn't imagine the heat down there. It's been a little warm here. Have fun on your trip .

Been wanting to build a hybrid. Slowly been buying parts to build one.

 

[t4driller]

400 shipped anyone??

 

[MS460WOODCHUCK]

Interested..are you interested in any partial trades?

 

[t4driller]

Interested..are you interested in any partial trades?

Pmed

 

[Strungar]

If the saw has not sold I will take it.

 

[derrek_j]

If it doesn't work out with strungar i to am interested.

 

[t4driller]

Replied to interested parties.

 

[t4driller]

Sold!!

 

[Lux]

Doing well Mike, other than the heat is a bit out of control,,, Headed up to the Finger lakes above Saratoga Springs in a few weeks for some much needed R&R,,, Can't wait!!!
GLWYS,,, I have a ported 7910,,, it is a beast of a work saw,,,

I here you on the 440, they are sweet machines for sure I run A Hybrid W/460 top end pretty regular w/20" setup. it will cut anything I need!!!!

I just left Lumberton 2 weeks ago. Wife's family is from there. I'm from Houston! Texas is in my blood but it's too dang hot!

 

[RiverRat2]

I hear you, Looking at a property up near Hadley NY in the Adirondacks for a summer home