Dose this stuff run this clean or am I about to have troubles?

[Trigger-Time]

Put new PC kit on 064 I did'nt have a new plug on hand, installed
new Bosch WSR6F, run two tanks in the saw tonight. I pulled plug
and it looks very lean to me. Was using the saw as a log
splitter, with the grain. I have run a total of 6 tanks in the saw
their is no carbon, ZERO on the piston or exhaust port, all 6 tanks
have been Mobil 2T mixed 13 oz to 5 gals of gas= 49 to 1
Dose this stuff run this clean or am I about to have troubles?
PC look great.

I did not wipe the plug off it was this clean.

 

[04ultra]

Mine looks light brown running 2T...

 

[Timberhauler]

Does it seem like it is running lean??...I ran Motorex cross power 2t oil in my two stroke race bikes with Klotz Ultimate2 race fues,and even when jetted a little on the rich side,my plugs were always clean.

 

[Trigger-Time]

Does it seem like it is running lean??...I ran Motorex cross power 2t oil in my two stroke race bikes with Klotz Ultimate2 race fues,and even when jetted a little on the rich side,my plugs were always clean.

Splitting 16" to 18" sticks with a 3/8 8 pin sprocket, If I don't
lean in to it a little the saw will four stroke in the cut, I have
RPMs set at 12000 to 12500

 

[bwalker]

If your only taching out at 12,500 your fine. MX2T burns very clean.

 

[Trigger-Time]

Mine looks light brown running 2T...

Are you at 50 to 1 .............OR?

 

[Trigger-Time]

If your only taching out at 12,500 your fine. MX2T burns very clean.

The looks of that plug scares me!........when I pulled it,........Oh Crap!

 

[Lakeside53]

Looks fine to me.. It will eventually get coated with fuel additives..

Welcome to the world of synthetic mix oil..

 

[04ultra]

Have about 100 tanks through the WHS 066 and with the bore scope it still looks like new...Real clean ..Mobil 2T




.

 

[Trigger-Time]

Pic of Q-Tip I rubbed on piston top, back and forth about 5 strokes

 

[04ultra]

Are you at 50 to 1 .............OR?

40 to 1

 

[Trigger-Time]

Thanks, This boy was ready to add more oil to the mix.

for you guys

 

[Lakeside53]

I run 50:1 unless milling.. oh,, wrong thread..opcorn:

 

[Trigger-Time]

I run 50:1 unless milling.. oh,, wrong thread..opcorn:

I sure did'nt want to have a vote in the second........POLL! :hmm3grin2orange:

 

[04ultra]

I run 50:1 unless milling.. oh,, wrong thread..opcorn:

Just admit to us your running (Amsoil) ...



.

 

[bwalker]

32:1 with MX2T looks like this.

 

[Trigger-Time]

I'm Sold. thanks for the pics, bwalker

 

[Lakeside53]

Ah.. another convert to the world of synthetic...:biggrinbounce2:

 

[RaisedByWolves]

Do they make a castor based synthetic or should I stick with 90wt?


.

 

[Lakeside53]

Do they make a castor based synthetic or should I stick with 90wt?


.

For you saws, I'd use diesel drain oil...