Drive link # question

[Bonzo]

I have a PP4218AVX that I wish to change to a 16" bar & chain .
I realize the 3/8 pitch & .050 thickness will remain the same but will the # of links be 56 as other saws of this make are when they are made stock as 16" ?

 

[Bill G]

They should all be the same if it is not an off brand oddball bar. The number of drive links should be stamped on the bar also

 

[Bonzo]

They should all be the same if it is not an off brand oddball bar. The number of drive links should be stamped on the bar also

I want to get an Oregon bar & chain combo from Amazon , so I don't have a 16" bar on hand to look at but thanks . I'll order the 56.
Thanks for the reply .

 

[Bill G]

Well as long as you are ordering a combo it will be right, well if it is the correct bar that is. I think darn near all those small/,medium poulans and huskies take the same mount

 

[Bonzo]

Very good bud.
Thanks again !

 

[barebunns]

I have a PP4218AVX that I wish to change to a 16" bar & chain .
I realize the 3/8 pitch & .050 thickness will remain the same but will the # of links be 56 as other saws of this make are when they are made stock as 16" ?

ebay sells themm chains