Dynamark 39 CC Chainsaw??

[Aaron Rybicki]

This is my brother in law's saw. It is a Dynamark 39CC saw. Not a whole lot of information on similar saws anywhere. I've seen in other threads that this saw is basically a rebadged Lombard saw. Anyone have any info on approximate year or bar mount? I thought I seen somewhere that it was A061. It only has one bar stud.

It hasn't ran in about a decade at least and after some fresh 40:1 it would fire and run on it's PTO side until I added some SeaFoam to the tank and it ran at any angle and was very peppy. Also read about 153 PSI on the Compression tester.

Any info on this saw at all would be great... Here's a video of it.

 

[Aaron Rybicki]

Definitely not the best design with the plug wire so close to the muffler..

 

[champion221elite]

It somewhat looks like a rebadged Homelite.

 

[Aaron Rybicki]

It somewhat looks like a rebadged Homelite.

I've seen that as well in other posts but nobody has specified.

 

[chipper1]

@ray benson got any info.

 

[ray benson]

Looks like a rebadged Lombard Little Lightning Super . Made in the late 1970's
https://www.ebay.com/itm/Vintage-Lo...457694?hash=item340616cfde:g:6-YAAOSwaFRcbeqI
http://www.acresinternet.com/cscc.n...56b20f1228903f1688256c5a001166dd?OpenDocument
Good luck finding parts, probably would need a parts saw.

 

[HarleyT]

Put up a closeup of that sticker, and look on the bottom for stickers.

 

[Aaron Rybicki]

Close Ups

 

[chipper1]

Looks like a rebadged Lombard Little Lightning Super . Made in the late 1970's
https://www.ebay.com/itm/Vintage-Lo...457694?hash=item340616cfde:g:6-YAAOSwaFRcbeqI
http://www.acresinternet.com/cscc.n...56b20f1228903f1688256c5a001166dd?OpenDocument
Good luck finding parts, probably would need a parts saw.

Your the man Ray .

 

[ray benson]

Saw made in Harrison Ohio according to the tag. Another thread with some info
https://www.arboristsite.com/commun...ombard-dynamark-and-maybe-others-help.174237/

 

[HarleyT]

Way back when, I believe that Dynamark was bought by AMF.
https://en.wikipedia.org/wiki/American_Machine_and_Foundry

Then it also later became associated with Noma, then later absorbed by Murray.