Thought I would do a review of my Efco MT 5200. I couldn't find any info before I bought mine so might help someone.
We run the 5200 with an 18in bar and .325 chain. The 5200 starts great. It’s usually off on the 3rd pull cold and one pull when warmed up. We have about 8-10 tanks thru this saw and it cuts great. It will handle the 18in bar buried in oak very well. As it started to break in it started to pull the 18in better and better. It will cut with any of the 50cc saws out there in its price range. I like the adjustable oil pump and it seems to keep the chain oiled well. I found the Efco does had a rubber gasket under the air filter and I have not seen any fines getting in carb intake. Overall very impressed with the efco saws. For a firewood cutting/farmer like me that are a saw worth looking at if you have a dealer nearby. I will do a review later on my MT4100 and MT 6500.
