Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Thanks for all that! Metering lever is now readjusted, that was just a test to see if if helped things.1. Pop-off pressure: Didn't know about this! It's about 15 psi. It seems like it's slowly closing by around 8-9 psi.2. Mixture: I've been working with both needles at 1.25 turns out. I've played with the L screw, but no reasonable setting lowers the idle appreciably. 3. Throttle return: I'm working with the cover off and the linkages removed. I feel reasonable tension on the throttle return spring, and if I hold the carb up I don't see any light through the throat (except for the little half-moon at the bottom).
Thanks for all that! Metering lever is now readjusted, that was just a test to see if if helped things.
1. Pop-off pressure: Didn't know about this! It's about 15 psi. It seems like it's slowly closing by around 8-9 psi.
2. Mixture: I've been working with both needles at 1.25 turns out. I've played with the L screw, but no reasonable setting lowers the idle appreciably.
3. Throttle return: I'm working with the cover off and the linkages removed. I feel reasonable tension on the throttle return spring, and if I hold the carb up I don't see any light through the throat (except for the little half-moon at the bottom).
