johncinco
Addicted to ArboristSite
SOLD!
Dang I miss the days of deleting your own threads.
I have a david Bradley for sale. Model 917.60028.
You can see the info at acres at http://www.acresinternet.com/cscc.n...ddfc063d04a161a588256bb7004fe61c?OpenDocument
This is in pretty nice shape. Pulls over. I did not try to start it. The guy I bought it frm says it ran when he put it up in the garage. May have been 2 months ago, may have been 20 years ago! (time sure flies when you get older) 4.7 CU , 77 CCs. Has a bar and chain. The handle has been tig welded it looks like. I tried to show in the pics, on the bottom near the air filter. I am looking to sell it for $55 plus actual shipping as darn near as I can figure it to your address. Shipping from 49327.
MANUFACTURED BY: CRAFTSMAN (SEARS ROEBUCK & CO.)
CHICAGO, IL U.S.A.
SERIES OR ASSEMBLY NUMBER: 917.60028 U4D
YEAR INTRODUCED: 1965
YEAR DISCONTINUED:
ENGINE DISPLACEMENT: 4.7 cu. in. (77cc)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 2.0 in. (50.8 mm)
PISTON STROKE: 1.5 in. (38 mm)
CYLINDER TYPE: Aluminum with cast iron sleeve
INTAKE METHOD: Reed valves
MANUFACTURER ADVERTISED H.P.: 4
WEIGHT : 21.5 lbs. powerhead only
OPERATOR CONFIGURATION: One Man operation
HANDLEBAR SYSTEM: Rigid
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die cast magnesium
MAGNETO TYPE: Phelon
CARBURETOR: Power Products diaphragm type, gravity feed.
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM: Skinner ribbon filter element
STARTER TYPE: Power Products automatic rewind
OIL PUMP: Manual
OPERATING RPM: 4,500
IGNITION TIMING: 0.175 in. (4.44 mm) before TDC
BREAKER POINT SETTING: 0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP: fixed
SPARK PLUG TYPE: Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP: 0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO: 1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: SAE 30 non-detergent
CHAIN PITCH: 7/16 in.
CHAIN TYPE: Oregon
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED: 12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED: 16 in. (40 cm)
COLOUR SCHEME: Metallic Grey enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:
--------------------------------------------------------------------------------
COMMENTS: Used Power Products AH-47 type 1225A engine. Used new unit frame design U4D
Dang I miss the days of deleting your own threads.
I have a david Bradley for sale. Model 917.60028.
You can see the info at acres at http://www.acresinternet.com/cscc.n...ddfc063d04a161a588256bb7004fe61c?OpenDocument
This is in pretty nice shape. Pulls over. I did not try to start it. The guy I bought it frm says it ran when he put it up in the garage. May have been 2 months ago, may have been 20 years ago! (time sure flies when you get older) 4.7 CU , 77 CCs. Has a bar and chain. The handle has been tig welded it looks like. I tried to show in the pics, on the bottom near the air filter. I am looking to sell it for $55 plus actual shipping as darn near as I can figure it to your address. Shipping from 49327.
MANUFACTURED BY: CRAFTSMAN (SEARS ROEBUCK & CO.)
CHICAGO, IL U.S.A.
SERIES OR ASSEMBLY NUMBER: 917.60028 U4D
YEAR INTRODUCED: 1965
YEAR DISCONTINUED:
ENGINE DISPLACEMENT: 4.7 cu. in. (77cc)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 2.0 in. (50.8 mm)
PISTON STROKE: 1.5 in. (38 mm)
CYLINDER TYPE: Aluminum with cast iron sleeve
INTAKE METHOD: Reed valves
MANUFACTURER ADVERTISED H.P.: 4
WEIGHT : 21.5 lbs. powerhead only
OPERATOR CONFIGURATION: One Man operation
HANDLEBAR SYSTEM: Rigid
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die cast magnesium
MAGNETO TYPE: Phelon
CARBURETOR: Power Products diaphragm type, gravity feed.
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM: Skinner ribbon filter element
STARTER TYPE: Power Products automatic rewind
OIL PUMP: Manual
OPERATING RPM: 4,500
IGNITION TIMING: 0.175 in. (4.44 mm) before TDC
BREAKER POINT SETTING: 0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP: fixed
SPARK PLUG TYPE: Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP: 0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO: 1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: SAE 30 non-detergent
CHAIN PITCH: 7/16 in.
CHAIN TYPE: Oregon
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED: 12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED: 16 in. (40 cm)
COLOUR SCHEME: Metallic Grey enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:
--------------------------------------------------------------------------------
COMMENTS: Used Power Products AH-47 type 1225A engine. Used new unit frame design U4D
Last edited: