Want to Sell GB,,sanduik,,disston,,mcculloch NOS bars

[o8f150]

these bars are all NOS,, some may have scratches,, all bars listed are GB unless other wise stated,, now i may be wrong but i think these where made in australia since they are older,,i measured the mount and it is listed for each bar since I don't know exactly what each one is for,,, here are the prices which includes shipping to the lower 48,,, 14's is 15.00,,,16's is 20.00,,,18"s is 25.00,,,20" is 30.00,, buy more then 1 and i will cut a deal,,,,,,,
20" 12mm large stihl 50 gauge hard nose x3
16" 8mm 50 gauge closed tail hard nose x7
20" 8mm 3/8 50 gauge sprocket nose x1 SOLD!!!!!!
16" 8mm 50 gauge open tail hard nose x3
16" poulan black letter 8mm 50 gauge hard nose x1 SOLD!!!!!!!!
16" mcclloch 8.5mm 3/8 50 gauge sprocket nose x1 SOLD!!!!!!
18" sanduik 12mm 325 63 gauge sprocket nose x1 SOLD!!!!!!!
16" black oregon bar 8.2mm 325 50 gauge sprocket nose x1
14" silver bars 6.5mm 3/8 50 gauge sprocket nose x3
16" disston 9mm for older small stihls 3/8 50 gauge sprocket nose x2
16" mcculloch for 310,,320,,330 ect,,, 3/8 50 gauge sprocket nose x3

 

[Duane(Pa)]

I'll take the 18" Sandvik. PM incoming. DW

 

[hunter72]

Scott

Please add the 8mm 3/8 .050 20" sprocket nose to my pile that should work on my brothers echo. I will send the other M.O. out tomarrow.
John

 

[o8f150]

Scott

Please add the 8mm 3/8 .050 20" sprocket nose to my pile that should work on my brothers echo. I will send the other M.O. out tomarrow.
John

will do john,, thanks

 

[Eccentric]

Scott the 8mm 'closed slot' bars should be of the A041 pattern, as used on small Poulan and Echo saws (and many others).

The open slot 8mm bars should be for the tiny Stihl saws (A074).

The open slot 8mm bars with the 'square' section in the front of the slot (such as that 'banana nosed' Guard Tip bar) are A061 for the tiny Homelite XL/XL2/Super2/200/Bandit/240/245/etc saws.

That McCulloch branded Windsor bar (above the Poulan branded hardnose) is an MXT mount (same as the Oregon D276) for a 10-series.

The Poulan branded hardnose is an A176 mount as used on midsized Poulans (200/300 series, 360-451 series), 3400-4000, PP375-395, 4200/4400/4900/5200/5400 with 5/16" studs, etc. Also used on the early XL-12 series Homelite saws with 5/16" studs, Roper 3.7 saws as built for Sears, midsized Echo (CS451, etc), Lombards that look like XL-12's, etc.

The black bar (with the camera date stamp over it) below that Poulan bar is a K095 as used on small Huskys, Homelite Super E-Z AO's, and others....

 

[o8f150]

Scott the 8mm 'closed slot' bars should be of the A041 pattern, as used on small Poulan and Echo saws (and many others).

The open slot 8mm bars should be for the tiny Stihl saws (A074).

The open slot 8mm bars with the 'square' section in the front of the slot (such as that 'banana nosed' Guard Tip bar) are A061 for the tiny Homelite XL/XL2/Super2/200/Bandit/240/245/etc saws.

That McCulloch branded Windsor bar (above the Poulan branded hardnose) is an MXT mount (same as the Oregon D276) for a 10-series.

The Poulan branded hardnose is an A176 mount as used on midsized Poulans (200/300 series, 360-451 series), 3400-4000, PP375-395, 4200/4400/4900/5200/5400 with 5/16" studs, etc. Also used on the early XL-12 series Homelite saws with 5/16" studs, Roper 3.7 saws as built for Sears, midsized Echo (CS451, etc), Lombards that look like XL-12's, etc.

The black bar (with the camera date stamp over it) below that Poulan bar is a K095 as used on small Huskys, Homelite Super E-Z AO's, and others....

thanks for the info,,, greatly appreciated,,,, so in other words you want to buy the rest of them make you a good deal,

 

[o8f150]

I can't believe I still have these bars,,, figured they all would have new homes already

 

[redheadwoodshed]

I'll take the McCulloch bar that fits the 10 series.

 

[redheadwoodshed]

At the same time, give me a price on all you have left.

 

[o8f150]

At the same time, give me a price on all you have left.

pm being sent

 

[Eccentric]

You're welcome Scott. Figured it'd help your sales if folks know what fits what.

 

[o8f150]

You're welcome Scott. Figured it'd help your sales if folks know what fits what.

your a good man,, I don't care what they say about you

 

[redheadwoodshed]

Hey buddy, I got the Mac bar today. Thanks, I'll put it to good use.

 

[Lootbug]

I'm confused by the numbers and such, but if you have a sprocket tip 16" or 18" that will fit a 346xp I'd be on it.

 

[Eccentric]

That would be an A095 or K095 mount bar. I believe the black bar at the bottom of this pic with the camera date stamp over it would work for you if it's the pitch/gauge that you're looking for.

 

[Lootbug]

Thanks Eccentric.

 

[o8f150]

I would like to see these gone this week,,,,,, if someone wants to buy them all or just 1 pm me and I will make a good deal on them just to get them off my bench